How to Replace the Wiper Blades on a Honda Fit?

1 Answers
LaMakayla
07/29/25 9:04pm
Method for replacing wiper blades on a Honda Fit: 1. Press the lock on the hook at the end of the wiper arm inward, then pull the wiper bracket downward with a bit of force to remove it; 2. You will notice that one side of the wiper blade's fixing groove has a fixed end while the other side does not; 3. Pinch the end with the fixed position and pull the wiper blade backward with force to remove it; 4. Shake the removed wiper blade a couple of times to loosen the two metal strips embedded inside; 5. Install the metal strips onto the new wiper blade and reattach it to the wiper bracket. The wiper is a tool on the front windshield of motor vehicles designed to simply clear rainwater and other debris that may obstruct vision. The dimensions of the Honda Fit are 4065mm in length, 1695mm in width, and 1525mm in height.
Was this review help?
15
1
Share
More Forum Discussions

What is the reason for pressure leakage after replacing the brake master cylinder?

If there is still air leakage after replacing the brake master cylinder, it may be due to a fault in the vacuum booster tube or the vacuum booster itself, and it has nothing to do with the brake master cylinder. You need to go to a repair shop or 4S store for inspection. The main function of the brake master cylinder is to provide brake assistance, which only takes effect after the vehicle's engine is started. The symptoms of a faulty brake master cylinder are as follows: 1. Oil leakage at the connection between the brake master cylinder and the vacuum booster or at the limit screw. 2. Poor or ineffective braking even when the brake pedal is fully depressed. 3. The brake pedal feels soft when pressed. 4. The vehicle pulls to one side after braking. 5. Sudden brake failure. 6. The brake pedal does not return or returns slowly.
10
1
Share

Does Canada drive on the left or right side of the road?

Drive on the right. In most countries, vehicles drive on the right side of the road, with only a few island nations and others driving on the left. Driving on the right is considered safer because, in emergency situations, most people instinctively turn the steering wheel to the right. This behavior prevents the vehicle from swerving into oncoming traffic, reducing danger. The origin of right-side driving: 1. Ancient China: Pedestrians, horses, and vehicles generally stayed and moved on the left side of the road, known as "left greeting." When greeting guests, people typically used their right hand, so their bodies naturally leaned to the left. 2. France: The habit of driving on the right side of the road emerged in 18th-century France due to the country's well-developed postal and freight wagon systems. These wagons were usually pulled by two horses, and drivers held the whip in their right hand. Driving on the right allowed them to look left when encountering oncoming traffic, avoiding collisions between wheels or axles. 3. United States: Like France, the U.S. had a developed postal wagon system, leading to the adoption of right-side driving. In 1792, Pennsylvania passed a law mandating right-side driving, followed by New York in 1804 and New Jersey in 1813. This practice gradually spread throughout the entire country.
3
1
Share

How to Appeal a Red Light Violation?

Go to the traffic management department to verify and correct the violation according to the law enforcement procedures. Below is a detailed introduction about it: 1. Key Point of Appeal 1: Whether a safe distance was maintained from the vehicle in front. This is the question most likely to be raised by traffic police during the appeal. Article 43 of the Road Traffic Safety Law states that when motor vehicles are driving in the same lane, the following vehicle should maintain a safe distance from the vehicle in front to allow for emergency braking. 2. Key Point of Appeal 2: Article 38 of the Road Traffic Safety Law states "Vehicles and pedestrians shall pass according to traffic signals." Here, it is important to clarify what constitutes a traffic signal, which does not only refer to traffic lights. 3. Key Point of Appeal 3: Verify whether there is an issue with the setting of the traffic signal light.
17
5
Share

How to Adjust When the Rearview Camera Has No Signal?

Rearview camera no signal is caused by poor line contact. It is necessary to check the wiring and the connection points of the whole vehicle installation in time to see if there is a loose connection. The following is a related introduction about the rearview camera: 1. The function of the rearview camera: The reversing video image uses an infrared wide-angle camera device installed at the rear of the vehicle, and the obstacles behind the vehicle can be clearly seen through the display screen in the vehicle. 2. The function of the rearview camera: If the Sagitar is equipped with a reversing video image function, when the Sagitar owner shifts into reverse gear, the system will automatically turn on the high-definition reversing camera located at the rear of the vehicle, clearly displaying the situation behind the vehicle on the LCD screen, allowing the Sagitar owner to accurately grasp the road conditions behind, making reversing as easy and confident as moving forward.
14
4
Share

What are the consequences of water entering a motorcycle engine?

The consequences of water entering a motorcycle engine are as follows: 1. Immersion in water: If the engine is not started, it will not cause irreversible damage to the engine. The main task is to clean the accumulated water inside the engine, but the extent of cleaning should be considered based on the situation. 2. A small amount of water enters the cylinder: In some cases, due to the small amount of water, the engine can still be started without the owner's awareness. If the owner continues to drive at this time, the piston may get stuck in the cylinder, the connecting rod may bend or break, or even directly puncture the cylinder. Such an engine may require major repairs or be scrapped, leaving sequelae such as shaking, power loss, and malfunctions. 3. A large amount of water enters the cylinder: In this case, the engine damage is the most severe.
11
4
Share

What size tires fit 17-inch rims?

17-inch rims are best paired with tires of size 225/50-17R. Here are some details about rims: 1. Rims are also called wheel rims: They are cylindrical metal components that support the tire from the inside and are mounted centrally on the axle. 2. Types of rims: Rims come in various types based on diameter, width, manufacturing method, and material. Depending on the characteristics and requirements of different vehicle models, rim surface treatment processes vary, mainly categorized into painted and plated finishes. By material, they can be divided into two main categories: steel rims and alloy rims.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.