How to Replace the Wiper Blades on a Geely Car?
3 Answers
Geely car wiper blade replacement method is: 1. First, fully raise the wiper arm, place a cloth on the windshield, and adjust the wiper blade angle by lifting the wiper arm; 2. Position the wiper blade at a 90-degree angle to the wiper arm. The entire wiper blade is secured to the arm with a clip, making it easier to remove and install at this angle; 3. Lift the rubber blade, pull it sideways, press down firmly on the main bracket to separate the wiper blade from the arm, then remove the entire wiper blade; 4. Lift the cover in the middle of the wiper blade, thread the new wiper support through, and secure it by snapping it into the wiper's slot and tightening. Geely Automobile Group is a subsidiary of Zhejiang Geely Holding Group, headquartered in Hangzhou, Zhejiang, China. The group currently owns the Geely, Lynk & Co, and Geometry automotive brands.
Last week, I just replaced the wiper blades on my Geely Emgrand. It's a pretty simple job. First, park the car on level ground and turn off the engine—safety first. Then, locate the wiper arm, which can usually be lifted about 90 degrees, and place a cloth under it to prevent scratching the windshield. Check if the old wiper blade has a release button; press it to remove it easily. When installing the new wiper blade, make sure it's oriented correctly, then push the U-shaped hook all the way in until you hear a 'click' to lock it in place. Finally, spray some windshield washer fluid and test the wipers to ensure smooth movement and no noise. It's recommended to replace them every six months. Silicone wiper blades last longer and can also resist UV aging in summer. Doing it myself saved me 30 yuan in labor costs, and a new wiper blade only costs a few dozen yuan—you can get them online or at auto parts stores, just make sure the size fits Geely models. Never operate the wipers when they're dry to avoid damaging the motor or windshield. Before driving, always check the wiper blades for cracks and replace them promptly to ensure clear visibility in the rain.
It was my first time helping a friend replace the wiper blades on a Geely Binyue, and the operation was basically effortless—done in just 10 minutes. First, ensure the car is turned off and the handbrake is engaged. Locate the wiper arm (that metal bar), lift it slightly to avoid touching the windshield. The old wiper has a small switch—press it to slide the blade off; don’t yank it forcefully. When installing the new blade, pay attention to the connector direction. Geely mostly uses standard U-hooks—just align and snap it into place. Test by turning on the low-speed setting with some washer fluid to check if it sweeps cleanly. If you buy the wrong size, it might wobble or miss spots. I bought a compatible set from JD.com for just 20 yuan—cheap and durable, saving way more time than visiting a dealership. Regularly check the wiper rubber for wear, and your driving safety in the rain will improve significantly.
