···
Log in / Register

How to Replace the Wiper Blades on a Fista?

1Answers
LeBradley
07/24/2025, 02:50:26 PM

Fista wiper blade replacement method is: 1. Move the wiper towards the front of the car. When the wiper swings to a specific position, it will be fixed; 2. Release the two clips securing the wiper to remove the old rubber blade; 3. After installing the new rubber blade, simply return the wiper to its original position. Taking the Fista 2021 280TGDi GLX Elite Edition as an example: It is a compact 4-door 5-seater sedan under Beijing Hyundai, with dimensions of 4660mm in length, 1790mm in width, and 1425mm in height, a wheelbase of 2700mm, equipped with a 7-speed dual-clutch transmission, and a top speed of 218 kilometers per hour.

Was this review help?
110
Share
More Q&A

What are the reasons for the trunk not closing without applying force?

The reasons for the trunk not closing without applying force are as follows: 1. Overly stiff spring rods: To ensure the rear hatch automatically lifts when the opening switch is pressed, excessively stiff spring rods are used; 2. Rubber stops and locking mechanism: The rubber stops and locking mechanism are not properly matched; 3. Control circuit: Malfunction in the trunk control circuit; 4. Hydraulic support rods: Failure in the trunk hydraulic support rods. In fact, when facing a trunk that won't close, applying force will only cause more damage. The correct approach is to drive the vehicle to a repair shop for inspection. The trunk is used for daily transportation, and during travel, it often carries a large number of items. This easy-to-maintain trunk compartment is even suitable for storing food and beverages.
108
Share

What does N mean in an automatic transmission?

In an automatic transmission, N stands for Neutral. The N position is equivalent to neutral gear, which can be used during startup, when parking with the driver remaining in the vehicle, or when towing. When the gear lever is in this position, the transmission idles, and the engine power cannot be transmitted to the drive wheels, providing no driving or braking force to the wheels. An automatic transmission refers to a system where the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission has six gear positions: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). Automatic transmissions use planetary gear mechanisms to shift gears automatically based on the degree of throttle pedal input and changes in vehicle speed.
116
Share

What does 3a mean for tires?

3a tires are a brand under the Sentury Tire Group. Below is relevant information about the Sentury Tire Group: 1. Origin of Sentury: The Sentury Group was established in 2002 and is located in Xishui, Shandong Province, known as 'China's First Tire Village' and the largest tire manufacturing base in Shandong. After years of development, the group has built an industrial chain focused on automotive tire production, with cluster development of upstream and downstream products. 2. Sentury's industries: The group is a large enterprise integrating automotive tire production, wheel manufacturing, inner tubes, tire curing bladders, bead wire production, international trade, new product development and research, aircraft disassembly, and film and television industrial park development.
120
Share

What is the function of the metal baffle in the car experiment?

The initial baffle provides an initial velocity, while the final baffle prevents damage. Here are some precautions regarding car driving: Cold car warm-up: Proper warm-up helps the engine oil form an 'oil film' between engine components, thereby reducing component wear. Timely gear shifting: When driving a manual transmission vehicle during the break-in period, shift gears promptly and appropriately, avoiding incorrect behaviors such as high gear with low RPM or low gear with high RPM, and do not use a single gear for an extended period. Timely maintenance: Simply follow the manufacturer's recommendations in the vehicle manual, and after reaching a certain mileage or time, promptly inspect and maintain the vehicle, including changing the engine oil and oil filter, and conduct a comprehensive inspection of the chassis system. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the shock load on the vehicle's chassis and engine.
119
Share

Is it one or two annual inspections for cars after 15 years?

For cars after 15 years, it requires two annual inspections. Here is extended information about annual inspections: New regulations: According to the 2020 regulations, vehicles within 10 years require an inspection every two years. In the motor vehicle inspection reform implemented on November 20, 2020, the scope of motor vehicles exempt from inspection was expanded. On the basis of exempting non-operational mini and micro passenger vehicles with 6 seats or fewer from inspection within 6 years, non-operational mini and micro passenger vehicles with 7 to 9 seats (excluding vans) within 6 years were also included in the exemption range. On-site testing: For non-operational mini and micro passenger vehicles (excluding vans) older than 6 years but less than 10 years, the inspection frequency was adjusted from once per year to once every two years, but on-site testing is still required for the annual inspection.
113
Share

Where is the center point of an intersection?

It is where the center lines of two roads intersect, usually where traffic police stand to direct traffic. Large intersections typically have a marked point, while smaller ones generally do not. Below is related information about turning at the center of an intersection: 1. When turning left: Vehicles must turn closely around the center point of the intersection. At large intersections, there is usually a circle with diagonal lines inside, which marks the center point—often where traffic police direct traffic. 2. When making a left turn: Proceed near the center point before turning, meaning turning closely to the left side of the center point, also known as making a tight turn. This rule mainly prevents collisions with vehicles on the left. For intersections without markings, the center point is simply the intersection point.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.