How to Replace the Wiper Blades on a Buick Excelle?

[RubyAnn]

Buick Excelle wiper blade replacement method is: 1. Press the lock button on the wiper; 2. Keep the wiper at a 90-degree angle to the wiper arm; 3. Push out the old wiper blade and replace it with a new one. Taking the 2020 Excelle as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, wheelbase 2611mm, and fuel tank capacity 40l. The 2020 Excelle is equipped with a 1.3L naturally aspirated engine, with a maximum horsepower of 107ps and a maximum power of 79kw. It uses a MacPherson strut front suspension and a compound torsion beam rear suspension.

[VonStella]

Changing the wiper blades on a Buick Excelle is actually not difficult. I've been driving this car for five years and often replace them myself. After turning off the engine, make sure the wipers stop in the middle of the windshield. Avoid operating near the front of the car to prevent scratches. At the end of the old wiper blade, there's a release button—just press it firmly to remove the blade. Don't pull hard to avoid damaging the wiper arm connection. For new wiper blades, choose the correct matching model. The front windshield usually requires a pair of different sizes, such as 24 inches for the driver's side and 18 inches for the passenger side. Searching online for model-specific blades or buying them at an auto parts store is foolproof. When installing, align the blade with the slot and gently push until you hear a click, indicating it's securely fixed. After replacement, spray some water to test if the wiping is even and streak-free. It's best to inspect the wipers every six months and replace them before the rainy season for peace of mind—clear visibility helps prevent accidents. Also, remember to clean any residue on the windshield, as dirty glass can reduce the effectiveness of new wiper blades.

[Patel]

As a new car owner, I was quite nervous about changing the wiper blades. For the Buick Excelle, it's not too complicated: turn off the engine and disconnect the power to ensure safety, preventing the wipers from damaging anything while in operation. At the end of the old wiper blade, there's a small button—press and hold it to easily remove the blade without pulling too hard. After taking the new wiper blade out of its packaging, align it with the wiper arm slot and slowly push it in until it clicks into place. Make sure you hear the locking sound to confirm it's secure. Be careful not to choose the wrong size, as it may cause leaks or poor cleaning. Check your car's make, year, and model online or consult a 4S store staff member for the correct size. After installation, start the vehicle and test the low-speed wiper function to ensure smooth operation without skipping. Handle everything gently during the process to avoid scratching the paint or glass. Regular maintenance checks before rainy seasons are essential to ensure clear and safe driving visibility. If you're unsure about any steps, refer to the manual or ask a friend for simple guidance.

[Brad]

I often do small DIY car maintenance tasks, and changing the wiper blades on a Buick Excelle is super easy. After turning off the engine, locate the button at the end of the wiper arm, press it down to remove the old blade—don’t yank it forcefully. For the new wiper, make sure to pick the correct model, such as standard frameless wiper blades, then just click and push to lock it in place. While at it, wipe clean the glass in the wiper contact area and test the spray function—works great.

[Cassandra]

Maintaining good wiper blades enhances driving safety, and I always pay attention to this when replacing them. Turn off the engine and press the arm-end button to remove the old wiper to prevent scratching the windshield. Align the new part with the slot and secure it in place, then test the wiper for even operation. Choose the correct size to avoid hazards during rainy days.