How to Replace the Windshield Wiper on the Mazda 3 Axela?
2 Answers
The method to replace the windshield wiper on the Mazda 3 Axela is as follows: 1. Push the wiper towards the front of the car until it locks into a specific position. Press the silver-white button on the wiper arm, grip the wiper blade with your hand, and gently pull it outward to remove it. 2. Release the two securing clips and pull out the old rubber blade. 3. Separate the two metal strips of the wiper and align them back into the first groove position. 4. After successfully installing the new rubber blade, reverse the removal steps to reinstall the wiper. Taking the 2020 Mazda 3 Axela as an example, it belongs to the compact car category with body dimensions of: length 4662mm, width 1797mm, height 1445mm, a wheelbase of 2726mm, and a fuel tank capacity of 50 liters.
As someone who has been fixing cars myself for years, I find replacing the Mazda 3 wiper blades quite simple—the key is getting the right size. Typically, the driver's side is 24 inches, and the passenger side is 18 inches, which you can easily buy on Taobao or at auto parts stores. First, turn off the engine and place a towel on the windshield to prevent scratches. Then, lift the wiper arm by hand—it's spring-loaded, so avoid forcing it to prevent damage. Locate the small tab on the top of the old wiper blade, press it gently, and slide it out. Align the new wiper blade with the mounting slot, push it in until it clicks into place. Finally, lower the wiper arm slowly and test it with some water to ensure smooth operation. I recommend replacing them every 6 months or when they don’t clean well—it’s cost-effective and safer. By the way, choosing high-quality wiper blades extends their lifespan; avoid cheap no-name brands, as they tend to be noisy and break easily. The whole process takes about 5 minutes, and even beginners don’t need to worry about tools.
