How to Replace the Vehicle Environmental Protection List?

What does 'ramp' mean?

Ramp, also known as an approach, refers to the section of road that connects the upper and lower roads of an overpass or elevated road, as well as the section that connects the highway with adjacent auxiliary roads. Below are definitions of various types of ramps: 1. Entrance and exit ramps: These are auxiliary connecting sections for entering and exiting the main road, also known as approaches. In engineering terms, they typically refer to a short section that provides vehicles with access to the main road and adjacent auxiliary roads, or other main roads via bridges/slopes/connecting roads, as well as collector-distributor roads. They are a major component of road interchange construction. 2. Up and down ramps: These are auxiliary connecting slopes for entering and exiting elevated roads, moving upwards or downwards, usually referred to as 'interchange ramps.' Note: The above two types (items 1 and 2) often incorporate the design of collector-distributor roads. 3. Direct ramp: Places the left-turn lane on the left side. 4. Indirect ramp: Places the left-turn lane on the right side, using a loop to connect with other highways. 5. Semi-direct ramp: Similar to an indirect ramp but does not use a loop; instead, it uses a longer, more undulating elevated road as the connecting ramp.

17

4

Share

What is a Power Liftgate with Automatic Operation?

Power Liftgate with Automatic Operation allows for hands-free closing of the trunk lid, requiring the optional automatic control feature for the liftgate. The contactless liftgate opening system consists of an upper sensor and a lower sensor. The upper sensor is flat-shaped and detects the lower leg movement, while the lower circular sensor identifies toe movements. Both sensors are connected to an electronic analysis unit that continuously measures capacitance. By comparing the temporal patterns of measured capacitance changes, specific movement sequences can be recognized, enabling the system to identify intentional foot gestures (approaching and retreating from the bumper). The control unit for the power liftgate system manages and monitors the liftgate operation. With a button press, it automatically opens or closes the trunk lid. This automatic operation can only be activated when the vehicle is stationary, not during driving mode. The power liftgate control unit performs these functions: analyzing CAN messages and functional requests; converting CAN signals to standardized positions; controlling the liftgate actuator drive; regulating and monitoring the actuator's motor speed, position, and current consumption. The trunk lid can be automatically opened or closed by pressing any of the liftgate buttons. After authorization through the Keyless Entry and Start System, the junction box electronics release the trunk lock mechanism, followed by liftgate latch control.

18

1

Share

How many times are turn signals used throughout Subject 2?

There are a total of 6 instances where turn signals are required in Subject 2, which are: When starting the vehicle, turn on the left turn signal; When starting on the slope during slope fixed-point start, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the side parking spot and prepares to park 30 cm away from the edge before reversing; Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Turning the steering wheel within 3 seconds of activating the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with assessment criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, slope fixed-point parking and start (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves) as the five mandatory items (some regions include a sixth item: highway card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole testing, slope fixed-point parking and start, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, limited-width gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain road turns, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

14

5

Share

What does the B gear in new energy vehicles mean?

The B gear in new energy vehicles is an auxiliary braking gear. Here are the relevant details: 1. Introduction: The B gear in new energy vehicles is an auxiliary braking gear. Its purpose is to apply engine braking or strong braking (drag effect) when releasing the accelerator pedal on steep downward slopes, thereby preventing brake overheating. Acceleration can still be performed during this process. However, when driving at high speeds, compared to conventional vehicles, the deceleration caused by engine braking may feel relatively weaker. 2. Impact: Engaging the B gear in new energy vehicles falls under the category of low kinetic energy recovery. Prolonged use of the B gear while driving can significantly affect the vehicle's fuel economy.

17

1

Share

What Causes the Steering Wheel Stiffness in the 10th-Generation Civic?

Here are the reasons for the steering wheel stiffness in the 10th-Generation Civic: 1. Sensor malfunction: The input sensor failure prevents the ECU from properly obtaining user operation parameters; replace the steering angle sensor under the steering wheel. 2. ECU calculation deviation: The ECU's own calculation deviation leads to vehicle control contradicting user operation intentions; visit the authorized 4S dealership where the car was purchased to upgrade the ECU version. 3. Vehicle body imbalance during prolonged driving: This may be caused by the vehicle body imbalance during prolonged driving, leading to deviation in the yaw angle sensor position; after driving with heavy loads for extended periods, visit a local 4S dealership for a four-wheel alignment.

7

3

Share

Can the 2008 Volkswagen Bora Connect to Bluetooth?

Volkswagen Bora 2008 model can use Bluetooth mode. 1. Just turn on the car Bluetooth search switch and connect it with your mobile device to play normally. 2. If the car does not have Bluetooth function, you can install a Bluetooth transmitter using the cigarette lighter. Generally, connect via Bluetooth and then transmit via FM to listen to music in the car. 3. USB and Bluetooth cannot be used because there is no driver. 4. You can check the center console for any of the three symbols: Bluetooth logo, BlueTooth, or BT. If there is one, press it to turn on Bluetooth. After Bluetooth is turned on, the speaker will emit a prompt tone.

9

1

Share

How to Replace the Vehicle Environmental Protection List?

What does 'ramp' mean?

What is a Power Liftgate with Automatic Operation?

How many times are turn signals used throughout Subject 2?

What does the B gear in new energy vehicles mean?

What Causes the Steering Wheel Stiffness in the 10th-Generation Civic?

Can the 2008 Volkswagen Bora Connect to Bluetooth?

Will the 4S shop repair a newly bought car if it gets scratched?

What Causes Abnormal Noises While Driving a Car?

What Causes the Malfunction Light to Stay On in an EFI Motorcycle?

Does the Wuling Zhiguang have air conditioning?