How to Replace the Turn Signal Light on a Tiggo 3?

[LeEmmanuel]

The method for replacing the turn signal light on a Tiggo 3: 1. For replacing the front turn signal light, first open the engine hood and locate the three soft covers behind the headlight assembly; 2. The left and right covers are for the low beam and high beam lights, and there is another cover below. Remove the cover to find the turn signal socket with a handle. Unscrew and pull it out, then rotate the bulb to remove and replace it. The Tiggo 3 is a model under Chery, offering six variants with a 1.6L engine, positioned as the 'Practical and Stylish SUV Benchmark'. In terms of body dimensions, the Tiggo 3 measures 4420mm in length, 1760mm in width, and 1670mm in height, with a wheelbase of 2510mm.

[Brianna]

I often do minor repairs on my car, and replacing the turn signal on a Tiggo 3 isn’t too difficult. First, make sure the car is turned off and the key is removed to avoid short circuits or accidental starts. The turn signal is located on the side of the front bumper or within the headlight assembly—check the owner’s manual for specifics, as Tiggo 3 models may vary. Prepare a new bulb of the same type, usually T15 or T10 size, which costs just a few bucks online or at an auto parts store. Open the hood, locate the turn signal socket, and gently pry open the housing with your hands or a small flathead screwdriver—don’t force it to avoid cracking the plastic. Unplug the wiring connector, carefully remove the old bulb (avoid breaking the glass), and install the new one, ensuring the pins align properly. Reconnect the wiring and test the light switch (you don’t need to start the engine). If it doesn’t light up, check the corresponding fuse in the fuse box—it might be blown. The whole process takes about 10 minutes, and even beginners can learn it, saving you a trip to the repair shop and around 100 bucks. However, if you’re inexperienced or lack tools, it’s safer to ask a friend for help or watch a tutorial video—safety first. A faulty turn signal may seem minor, but driving with flickering or non-functional lights is risky, so fix it early for peace of mind on the road.

[DelKate]

As someone who drives frequently, changing turn signals requires caution. I always remind myself to prioritize safety before starting: park the car on level ground, engage the handbrake, and turn off the engine to cut power. The turn signals on the Tiggo 3 are easy to locate—usually on the side of the front bumper. Just pry open the small plastic cover. The tools needed are simple: gloves and a palm-sized screwdriver to prevent slipping and scratching. First, unplug the connector and remove the old bulb to check if it’s burnt out. Then, install the newly purchased bulb, pressing it gently and firmly into place to avoid misalignment, which could affect contact. Plug it back in and test—if the light turns on, it’s good to go. If it doesn’t work, don’t panic—it might be a wiring issue or a blown fuse. The turn signal fuse is located in the engine compartment’s fuse box, with its position marked on the box cover. Replacing a new fuse costs just a few cents. After replacement, take a short drive to test if the turn signals respond properly. I believe preventive maintenance is crucial—regularly checking bulb brightness can prevent sudden failures and improve driving safety. DIY saves money and hassle, but if you’re unsure about the steps, consult a professional to avoid turning a small issue into a big problem.

[VonTyler]

Replacing the turn signal bulb on the Tiggo 3 is actually quite simple. I've done it myself several times. The steps aren't complicated: Park the car and turn off the engine, locate the turn signal position at the front side, and use a small tool to open the lamp cover. Unplug the electrical connector, then remove the old bulb. When buying a new bulb, match the model number - the Tiggo 3 commonly uses T15 specification. Insert the new bulb, reconnect the plug, and test if the light works with the car door open. If it doesn't work immediately, check the fuse - its location is shown in the fuse box diagram. The whole process takes just a few minutes, and beginners can master it with some practice. Key points to note: Avoid using tools that are too sharp to prevent damaging the plastic, and regularly check the brightness after replacement to prevent potential hazards.