How to Replace the Starter Relay on a 7th Generation Accord?

1 Answers
VonPiper
07/29/25 11:04pm
Disconnect the negative battery cable, paying attention to the cable between the relay and starter during installation. Then reconnect the negative battery cable. From underneath the vehicle, remove the two bolts securing the starter to the engine. Install the new starter onto the engine.
Was this review help?
19
1
Share
More Forum Discussions

What Causes the Engine Warning Light to Illuminate in Chery Fengyun 2?

There are primarily 7 reasons why the engine warning light in Fengyun 2 may illuminate: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, which triggers the engine warning light. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear, leading to the illumination of the warning light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may lead to engine pipeline blockage, and in severe cases, cause the engine warning light to illuminate. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine warning light to illuminate. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel supply system failures can easily lead to catalytic converter issues. Anti-theft system malfunction: If the car's electronic anti-theft system malfunctions or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also prevent the engine from operating normally, while the engine warning light illuminates. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally, whether there is shaking, black smoke, etc. If such issues exist, avoid restarting the engine. Particularly, do not restart the engine if the red warning light is on. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The car will initiate a self-check function upon powering up. After 5-10 seconds, observe whether the warning light on the dashboard turns off. If the warning light does not turn off, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.
8
2
Share

Can modified exhaust systems be registered?

Modified exhaust systems can be registered. Article 10 of the "Regulations on the Registration of Motor Vehicles" stipulates that for a registered motor vehicle under any of the following circumstances, the owner of the motor vehicle shall apply to the vehicle management office at the place of registration for modification registration: 1. Nature: A commercial motor vehicle is changed to a non-commercial motor vehicle or vice versa, or other changes in the nature of use. 2. Jurisdiction: The residence of the motor vehicle owner moves out of or into the jurisdiction of the vehicle management office. An application for modification registration can be made to the vehicle management office at the place of registration. For modifications specified in items (1), (2), and (3) of the first paragraph of this article, the motor vehicle owner shall apply to the vehicle management office for modification registration within ten days after the modification.
8
5
Share

What does variable speed detection on highways mean?

Variable speed detection on highways involves six operational processes: meteorological monitoring and alerting, travel control activation, public announcement reminders, evidence collection and synthesis, data review and entry, and violation notification and penalties. Relevant information is as follows: 1. Introduction: Speed detection determines whether a vehicle is speeding by calculating its average speed. Specifically, it refers to two adjacent monitoring points on the same road section. When a vehicle passes these two points, its speed is recorded, and the system calculates the average speed to determine if the vehicle is speeding. 2. Function: It enables automatic monitoring and warning of meteorological information, dual evidence collection for violating vehicles, and automated comparison of violation data.
17
5
Share

How often should a newly obtained driver's license be renewed?

The first renewal for a newly obtained driver's license is required after 6 years, the second renewal after 10 years, and the third renewal results in a long-term driver's license. According to Article 26 of the "Regulations for the Implementation of the Road Traffic Safety Law", the following provisions apply: 1. 6-year validity period: If the motor vehicle driver has not reached 12 points in any scoring cycle during the 6-year validity period of the motor vehicle driver's license, the driver's license will be renewed with a 10-year validity period. 2. 10-year validity period: If the motor vehicle driver has not reached 12 points in any scoring cycle during the 10-year validity period of the motor vehicle driver's license, the driver's license will be renewed with a long-term validity.
18
3
Share

What is the following distance when exceeding 100 km/h on the highway?

When exceeding 100 km/h on the highway, the following distance should be more than 100 meters. Relevant information is as follows: 1. Introduction: When a motor vehicle is driving on the highway and the speed exceeds 100 km/h, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 km/h, the distance from the vehicle in front can be appropriately shortened, but the minimum distance should not be less than 50 meters. 2. Note: When driving on the highway under low visibility weather conditions such as fog, rain, snow, dust, or hail, the highway management department should issue speed limits, maintain distance, and other prompt information through displays.
6
3
Share

What is the maximum speed when visibility is 50 meters on the highway?

When driving on the highway with visibility within 50 meters, the maximum speed must not exceed 30 km/h. Relevant information is as follows: 1. Note: Driving on the highway must strictly adhere to the principle of lane separation and each vehicle staying in its own lane. It is not allowed to cross lines, change lanes, or ride on the lane dividing line. 2. Regulations on the maximum and minimum speeds on the highway: The minimum speed must not be less than 60 km/h, and the speed must not exceed 120 km/h. When driving under adverse weather conditions, the driver must reduce speed according to the conditions and speed limit signs.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.