How to Replace the Santana Air Filter?

[DeJulianna]

The method for replacing the air filter of the new Santana is as follows: 1. The Santana air filter is located above the engine, secured by 8 cross-head screws. Use a tool to remove these screws. 2. Take off the air filter cover and disconnect the air return tube to prevent any accidents during the removal process. 3. Remove the old air filter and replace it with a new one, then reattach the cover and screws. The replacement cycle for the Santana air filter is as follows: 1. The air filter should be replaced every 10,000 kilometers. 2. If the air filter is not dirty and free of oil stains, it can be cleaned by blowing out the dust inside and reused.

[SophiaMarie]

I just changed the air filter for my Santana last week and found it a pretty neat job that even beginners can handle easily. After popping the hood, locate the air filter box on the side of the engine – usually a black plastic case secured with screws or clips. I prepared a new air filter element and a screwdriver, first turning off the engine and waiting for it to cool down to avoid burns. Unscrew the bolts or push down the clips to open the cover, and the old filter inside was pitch black when removed. I blew away the dust inside the box. When placing the new filter, make sure the arrow points towards the intake direction to ensure a proper seal. Close the cover and tighten the screws, finishing the job in just a few minutes. DIY like this twice a year costs less than a few dozen bucks, saving money while protecting the engine. Remember, a dirty air filter can increase fuel consumption and reduce power, so regular checks can avoid major repair headaches. Now the car runs smoother, and the throttle response is much better.

[StStephen]

I've gained experience in changing the Santana's air filter myself—it's not difficult and saves a lot of money. After the engine cools down, locate the air filter box, usually positioned toward the front of the engine bay. Use simple tools like a screwdriver to remove the fastening screws or push the clips, then open the box. The old filter is often dirty, covered in dust when touched. Remove and discard it, then clean the inside of the box with a cloth. Insert the new filter in the correct direction—don’t mix up the arrow markings, or the seal won’t be tight, affecting airflow. Close the box and tighten the screws, and you're done. Buying the filter yourself costs only around 20 yuan, saving hundreds compared to a dealership visit. Proper air filter maintenance can extend engine life and reduce emissions. I recommend checking it during routine maintenance to avoid breakdowns. After replacement, start the car—the engine should run more smoothly.

[KiaraMarie]

I usually change the air filter for my Santana by myself. The steps are simple and safe. First, let the engine cool down, then open the hood and locate the air filter box near the engine. Use a screwdriver to remove a few small screws and lift the cover. After taking out the old filter, clean the dust inside the box. When placing the new filter, remember the direction and gently press it in. Then close the cover tightly and tighten the screws. The whole process takes about ten minutes, and all you need is a screwdriver. Doing it yourself saves worry and money, avoiding the hassle of going to a professional shop. A dirty air filter can make the car shake, and it drives much better after replacing it with a new one.