How to Replace the Remote Key Battery for Geely New Vision X6
4 Answers
When replacing the remote key battery for the Geely New Vision X6, ensure the environment is dry and avoid handling the battery with wet hands. Follow these steps: 1. Press firmly on the marked area of the remote key to release the mechanical key. 2. Gently pry open the remote key's casing using a tool to access the battery inside. 3. Open the remote key's casing. 4. Remove the old battery and replace it with a new one, paying attention to the correct polarity. Reassemble the key in its original position. 5. Close the remote key's casing to complete the replacement.
Replacing the battery for the Geely New Vision X6 remote key is actually quite simple for a DIY enthusiast like me. First, check the back of the key—there's usually a small screw slot. Use a micro screwdriver or a blade to unscrew it. Then, gently pry open the shell, being careful not to use too much force to avoid cracking the buttons. Inside, you'll find a small round battery, model CR2032. Pay attention to the positive and negative markings. Carefully remove the old battery and insert the new one, ensuring the positive side faces up to match the original position. Reassemble the shell and tighten the screw. Finally, stand near the car and test the lock and unlock functions to confirm the signal works properly. The battery typically lasts about 1-2 years. I recommend using Panasonic or Nanfu brand batteries to avoid leakage issues with off-brand ones. If the remote doesn’t work after replacement, it might be due to internal circuit issues or environmental interference—try cleaning the battery slot contacts. Also, remember to wash your hands before handling to prevent static damage to the electronics.
I've been driving for years, and changing the key battery is a breeze. If the key isn't working, don't panic—just do it yourself. Grab a small screwdriver to unscrew the tiny screws on the edge of the key, or for some models, just pry it open with your fingernail. Remove the old battery—remember it's a CR2032 type, which you can buy new for a couple of bucks at the supermarket. When installing, pay attention to the positive mark to avoid putting it in backward, as that could cause a short circuit and fry the electronics. After closing the case, press the buttons a few times to test. If it still doesn't work after replacement, check if the key buttons are stuck or if the battery contacts are oxidized. Changing the battery yourself can save you 20–30 bucks on repair costs and prevent remote failure before heading out. After changing, recycle the old battery—be eco-friendly.
Brief steps to replace the remote key battery: Open the key casing, remove the old battery and install a new one (model CR2032), then close the cover and test. Gently pry open the key edge or unscrew it with care. When installing the battery, ensure the positive side faces up—do not reverse the direction. Test at a close distance to confirm functionality. If it doesn't work after replacement, check for internal dirt.
