How to Replace the Remote Control Battery for GAC Trumpchi GS4?

[JulianaAnn]

To replace the remote control battery for the GAC Trumpchi GS4, follow these steps: Press the button on the back of the remote control in the direction indicated by the arrow, then pull the mechanical key outward to remove it. After taking out the mechanical key, use your fingernail to open the remote key along the side gap. Once opened, you will see the battery compartment on the back cover. Remove the old battery as indicated, replace it with a new one, close the back cover, and reassemble the key. The Trumpchi GS4 is a compact SUV produced by GAC Motor, with dimensions of 4545mm in length, 1856mm in width, and 1668mm in height, a wheelbase of 2680mm, and a fuel tank capacity of 55 liters.

[MacCalvin]

Replacing the battery for the GAC Trumpchi GS4 remote is really simple, just a few steps to get it done. From a DIY car accessories perspective, here's how: First, prepare a CR2032 coin cell battery, which can be bought online for just a few bucks. Then, take out the car key—there’s usually a small notch on the back. Use a coin or a small screwdriver to gently pry open the casing. Once you see the battery, remove it carefully, avoiding contact with the circuit board to prevent static damage. Simply replace it with the new battery and snap the casing back together. Finally, press the key buttons to test if it unlocks the car properly. Key point: If the buttons become unresponsive after long use, it might be due to battery aging—replacing it promptly can extend the key's lifespan. I recommend checking the battery level regularly for peace of mind and cost savings. The whole process takes less than five minutes, and if you're handy, it’s a breeze. Don’t wait until it fails at a critical moment—that could cause bigger trouble.

[DeAaliyah]

As someone who has driven the GS4 for several years, let me teach you how to replace the remote battery: Find the right spot—there's usually a small slit on the back of the key. Use a coin to twist it open, take out the old battery, and replace it with a new CR2032 battery. Then, close the case and test the buttons. Key points: Buy from reputable battery stores to avoid counterfeits, be gentle when prying open the key case to prevent damage, and handle it with care. I replace the battery every year and a half to avoid issues on the road. Also, dropping the key or mishandling it can affect battery contact, so proper storage is important. The whole process is simple and easy to learn—don't overthink it.

[Kathy]

Replacing the GS4 remote battery is quite straightforward. First, confirm the battery model is CR2032 and purchase a spare. There's usually an opening on the back of the key; use a small tool to pry open the shell and remove the old battery, then replace it with a new one and test the locking function. Key points: I've encountered unresponsive buttons after replacement, which sometimes happens if the shell isn't pressed tightly or the battery is inserted upside down—just adjust it. The battery lasts about two to three years, so replacing it early saves hassle.