How to Replace the Rear Wiper on the Qashqai?

1 Answers
DaisyLynn
07/29/25 6:47pm
The method to replace the rear wiper on the Qashqai is as follows: 1. Press the small clip of the rear wiper inward; 2. Push the bracket outward and remove it; 3. Open the clip of the frameless wiper and insert the bracket; 4. Align the position, pull tight, and secure the clip. The Qashqai is a 5-door, 5-seater compact SUV with body dimensions of: length 4401mm, width 1837mm, height 1593mm, and a wheelbase of 2646mm. It is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 111 kW and a maximum torque of 194 Nm. The drivetrain is front-wheel drive, with a front suspension using a MacPherson strut independent suspension and a rear suspension using a multi-link independent suspension.
Was this review help?
11
1
Share
More Forum Discussions

Why are Kia 4S stores being withdrawn?

4S internal shareholders no longer inject capital into 4S stores, and there is no working capital support, so they go bankrupt. The following is an introduction to Kia Motors related content: Kia Motors: Kia is Kia Motors Group, a Sino-foreign joint venture integrating automobile production and sales, established in December 1944, headquartered in Seoul, South Korea. Business scope: automobile sales service, the logo of Kia Motors consists of a bright red ellipse, white background and red KIA characters. Kia models include ForteCerato (Forte), CadenzaK7 (Cadenza), Sorento (Sorento), Sportage (Sportage), SportageR (Sportage R).
1
0
Share

What to Do If Your Driver's License Is Revoked for Overdue Renewal Beyond One Year?

If your driver's license is revoked due to overdue renewal beyond one year but not exceeding two years (i.e., the license has been overdue for one to three years), you can regain your driving eligibility by passing the road traffic safety laws, regulations, and related knowledge exam. Time Regulations: If the license is overdue for less than one year, it can be renewed normally; if overdue for one to three years, the license is revoked, but you can renew it by passing the subject one exam; if overdue for more than three years, the license becomes invalid and cannot be renewed. Penalties for Overdue Driver's License: You must not drive a motor vehicle during the overdue period, otherwise, it will be treated as driving without a license. If your driver's license is overdue for less than one year, you can renew it at any time, but if you drive on the road, you will face a fine of 200 yuan. If your driver's license is overdue for more than one year without renewal, the traffic management department will revoke it according to the law. If the overdue period is less than three years, you must retake and pass the subject one exam to regain your driving eligibility. If you drive during this period, you will face a fine ranging from 200 to 2000 yuan. If your driver's license is overdue for more than three years, it will be completely revoked. If you want to drive again, you must retake the driver's license exam. Otherwise, driving on the road will be treated as driving without a license, resulting in a fine of 2000 yuan and administrative detention for up to 15 days.
19
2
Share

What are the wheel hub specifications for the Mitsubishi Lancer EX?

The wheel hub specifications for the Mitsubishi Lancer EX are 5*114.3. Below is an introduction to the wheel hub ET value: Definition: The ET value of a wheel hub refers to the offset between the mounting surface of the wheel hub and the centerline of the wheel rim, commonly known as the offset. The J value represents the shape and height of the wheel hub flange. Introduction to ET value types: Zero offset wheel hubs indicate that the mounting hole surface is located at the centerline of the wheel hub; Positive offset wheel hubs indicate that the distance between the mounting surface and the center of the wheel rim is towards the outer side; Negative offset wheel hubs indicate that the distance between the mounting surface and the center of the wheel rim is towards the inner side.
12
4
Share

What is the reason for the constant flashing of the central yellow light in the Mitsubishi Pajero 4WD?

The central yellow light in the Mitsubishi Pajero 4WD keeps flashing because there is a fault in the 4WD system. Here is an introduction to related content about Mitsubishi Motors: Mitsubishi Motors: Mitsubishi Motors is a Japanese multinational automobile manufacturer headquartered in Minato, Tokyo, which became independent from the automotive division of Mitsubishi Heavy Industries in 1970. In terms of production volume, it was the fifth-largest Japanese automobile manufacturer in 2009 and the fifteenth-largest automobile manufacturer globally. History: Mitsubishi Motors produces private cars and light commercial vehicles and is a company under the Mitsubishi Group. Mitsubishi Motors Corporation became independent from Mitsubishi Heavy Industries in 1970 and is the youngest automobile manufacturing company in the Japanese automotive industry. On the other hand, the Mitsubishi Group has a long history of automobile production.
1
4
Share

Which button is the time button on the Great Wall Pao?

The time button on the Great Wall Pao is located at the lower left corner of the steering wheel. Below is an introduction to the related content of friction sounds when turning the steering wheel: Lack of oil in the shock absorber's plane bearing: Listen near the hood to see if the sound is coming from the top of the shock absorber. If the sound is from the shock absorber's plane bearing, you can apply some grease to the plane bearing. If the sound persists after greasing, replacement is the only option. Loose or damaged stabilizer bar bushings: Check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings not only cause noise when turning the steering wheel but also produce sounds when driving on uneven roads. Loose stabilizer bar bushings can be fixed by adding shims, but if they are damaged, replacement is necessary.
13
0
Share

What is the reason for the Mitsubishi Lancer EX clutch not responding?

Mitsubishi Lancer EX clutch not responding is due to aging hydraulic oil and rust on the clutch. The following is an introduction to the clutch-related content: Clutch: The clutch is located in the flywheel housing between the engine and the transmission, with the clutch assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch is the input shaft of the transmission. Function: The function of the clutch is to gradually engage the engine with the transmission, ensuring a smooth start of the car, temporarily cutting off the connection between the engine and the transmission to facilitate gear shifting and reduce the impact during shifting. It also serves to separate in case of emergency braking, preventing overload of the transmission and other drive systems, thereby providing certain protective functions.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.