How to Replace the Rear Wiper of Trumpchi GS4?

What Type of Fire Extinguisher Should Be Placed in a Car?

It is sufficient to place a 1 to 3 kg fire extinguisher in a car. Considering the suboptimal storage conditions inside the vehicle, it is advisable to opt for a dry powder or water-based fire extinguisher. Guidelines for using a dry powder fire extinguisher: 1. Before use, shake the extinguisher thoroughly several times to loosen the dry powder inside the cylinder; 2. Remove the safety pin, hold the nozzle with your hand, and aim it at the base of the flame; 3. Press the handle firmly to release the dry powder from the nozzle. The main types of vehicle fire extinguishers available in the market include dry powder extinguishers, ultra-fine dry powder extinguishers, carbon dioxide extinguishers, and water-based extinguishers. Vehicle fire extinguishers are specifically designed for use in cars.

2

4

Share

How to adjust the time on a Roewe 350?

To adjust the time on a Roewe 350: Press and hold the INFO button until the time format is displayed, then press the confirm button. When the hour format of the clock flashes, use the SEEK plus or SEEK minus button to adjust the hour, then press the confirm button. When the minute format flashes, use the SEEK plus or SEEK minus button to adjust the minutes. After both the hour and minute are correctly set, press and hold the confirm button to finish. The Roewe 350 is a compact sedan produced by SAIC Motor, with body dimensions of 4521mm in length, 1788mm in width, and 1492mm in height, a wheelbase of 2650mm, a front suspension type of MacPherson independent suspension, and a rear suspension type of H-shaped torsion beam non-independent suspension.

4

Share

What Causes Ignition Delay?

Ignition delay can be caused by the following reasons: Poor fuel quality: If your car suddenly changes from starting normally to experiencing delayed ignition, the first thing to consider is whether you have recently switched to gasoline with a different octane rating or from a different source. Throttle carbon buildup: This can affect the sensitivity of the throttle and air intake, causing delays or even errors in the computer's signal transmission, which may prevent the vehicle from starting. Fuel injector: The fuel injector is prone to accumulating sticky deposits, which can obstruct normal fuel injection, leading to poor gasoline atomization. This results in ignition delay and difficulty starting the car. Spark plug: If the spark plug has significant carbon buildup or leaks at the junction between the metal and ceramic parts, it can cause poor ignition.

6

5

Share

Is the 1.4T transmission in the Volkswagen Tayron wet or dry?

The 1.4T transmission in the Volkswagen Tayron is dry. Only the 2.0T models use a wet dual-clutch transmission. Most Volkswagen models equipped with the 1.4T engine utilize a dry dual-clutch transmission. The dual-clutch transmission is a relatively common automatic transmission, developed based on manual transmissions. The Tayron is built on the European version of the Tiguan and comes from Volkswagen's MQB A2 platform. The Tayron has three length specifications: 4589mm, 4595mm, and 4590mm, with a width of 1860mm, height of 1660mm, and wheelbase of 2731mm. The design of a shorter body with a longer wheelbase is a characteristic of new models on Volkswagen's MQB platform. Compared to the Kodiaq, which shares the same platform, the Tayron has a shorter body but aligns with its more premium positioning emphasizing sportiness.

5

1

Share

How to turn off the rear light of the Volkswagen Tayron?

Method to turn off the rear light of the Volkswagen Tayron: There is a switch on both sides of the rear light. Press the switch to turn off the rear light. The rear interior light of the car can also be turned off from the front row. There is a control button on the top of the center console, which can control both the front and rear lights of the car. The rear light of the Volkswagen Tayron is installed either on the top of the driver's compartment or on the top of the rear seats. The reading light plays a significant role. When the interior light is insufficient, the reading light can provide illumination for passengers inside the car. The brightness of the reading light is not set too strong, and it does not affect the driver's normal operation of the vehicle. The Tayron is a car under FAW-Volkswagen, with three body size specifications: length of 4589mm, 4595mm, and 4590mm, width of 1860mm, height of 1660mm, and wheelbase of 2731mm.

10

3

Share

How to Install the Ignition Coil on a Nissan Tiida?

The installation steps for the Nissan Tiida ignition coil are: 1. Open the ignition coil cover on top of the engine; 2. Use a pentagon wrench to remove the ignition coil fixing screw; 3. Disconnect the ignition coil power plug; 4. Gently pry it up with a screwdriver, place the new ignition coil, and tighten the screw; 5. After connecting the power plug, cover the top cover plate. The Tiida is equipped with a 1.6-liter HR16DE all-aluminum inline 4-cylinder engine, featuring a DOHC double overhead camshaft structure combined with CVTC (Continuous Variable Valve Timing Control) technology, delivering a maximum power of 80KW and a maximum torque of 153NM. In terms of configuration, it includes devices such as the IKEY intelligent key system, voice navigation system, and visual reverse monitoring system.

4

0

Share

How to Replace the Rear Wiper of Trumpchi GS4?

What Type of Fire Extinguisher Should Be Placed in a Car?

How to adjust the time on a Roewe 350?

What Causes Ignition Delay?

Is the 1.4T transmission in the Volkswagen Tayron wet or dry?

How to turn off the rear light of the Volkswagen Tayron?

How to Install the Ignition Coil on a Nissan Tiida?

What Causes the Warning Light to Illuminate in the Lavida?

Is it possible to drive in snowy weather?

How to turn on the low beam lights on the Borgward BX5?

What are the differences between Volkswagen Tayron and Tharu?