How to Replace the Rear Wiper of the Encore?

2 Answers
StDiana
07/24/25 10:56am
Method for replacing the rear wiper of the Encore: Lift the wiper arm away from the windshield, keep it steady in a position perpendicular to the windshield, press the tab, and remove the old wiper blade, separating it from the wiper arm. Insert the new wiper, gently rotate the new blade until the hook snaps into place, then return the wiper to the windshield. The Encore is a model under Shanghai General Motors, with body dimensions of 4295mm in length, 1798mm in width, and 1616mm in height, and a wheelbase of 2570mm. In terms of appearance, the Encore has become significantly more youthful and stylish compared to the current model, with the addition of a two-tone roof, exclusive styling packages, and optional wheel embellishments enhancing the vehicle's overall vibrancy.
Was this review help?
20
1
Share
SerenityMarie
08/11/25 5:57am
Changing the rear wiper on the Encore is actually quite interesting, and I often do it myself. First, park the car securely and turn off the engine to ensure safety and avoid any accidents. Then, go to the rear window and gently lift the wiper arm to separate it from the glass—otherwise, it might hit the glass and cause injury. Look at the connection point, which is usually a hook-style clip. Press the button on the side to release the old wiper, then slide it out without pulling too hard. When handling the new wiper, refer to the instructions on the packaging to match the correct model. Align it with the track, push it in until you hear a click, and it’s securely fixed. Before testing, don’t rush to activate it—manually move the wiper arm to check if it’s firmly attached, then spray water and test the wiping. Remember to buy the matching model, typically around 14 inches in size. Brands like Aero work well on the market. Check the wipers every three to six months; if the wiping noise becomes loud or leaves water streaks, it’s time to replace them. Learning this skill not only saves money but also boosts confidence, but if you’re not familiar with it, it’s best to seek help from a professional shop.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What is the normal gap size for spark plugs?

Generally, the normal gap for spark plugs ranges between 0.3 to 1.6mm. A larger spark plug gap produces a longer arc during ignition, making it easier to ignite the air-fuel mixture in the cylinder. Hazards of excessive spark plug gap: 1. Poor ignition, requiring higher pulse ignition voltage; 2. Engine stalling may occur during operation; 3. Incomplete fuel combustion due to poor ignition, leading to increased fuel consumption. Hazards of insufficient spark plug gap: 1. Difficulty starting or failure to start; 2. Increased noise and heavy exhaust emissions; 3. Incomplete combustion of the air-fuel mixture, resulting in higher fuel consumption.
10
1
Share

How to check the oil dipstick on an Audi A3?

Audi A3 oil dipstick checking method is to use the oil dipstick to check the oil level, with the standard being that the oil level should be between the upper and lower limits. The Audi A3 is a compact car, equipped with a 1.4TL4 engine featuring turbocharged intake, delivering a maximum horsepower of 150ps and a maximum torque of 250nm. The dimensions of this car are 4343mm in length, 1815mm in width, and 1458mm in height, with a wheelbase of 2630mm. It is a 5-door, 5-seat hatchback with a 7-speed dual-clutch transmission, capable of reaching a top speed of 210km/h and a maximum power output of 110kw.
15
1
Share

Is a Four-Wheel Alignment Necessary After Rotating Front and Rear Tires?

Rotating front and rear tires requires a four-wheel alignment because swapping the tires ensures even wear between the front and rear tires, thereby extending their service life. The four-wheel alignment process includes the following steps: 1. Lift the vehicle using a lift and check the tire pressure; 2. Power on the computer and secure the steering wheel; 3. Install the four-wheel sensor rods and connect the leads to read alignment data; 4. Adjust the rear wheel camber and tighten the shock absorber screws; 5. Rotate the adjustment tube clamp screws to ensure consistent toe-in data for both wheels; 6. Loosen the tie rod screws to obtain standard data; 7. Confirm that the tie rod ends are at a right angle and tighten the screws.
18
3
Share

Will the Engine Stall If You Brake Without Pressing the Clutch?

Braking without pressing the clutch will cause the engine to stall because the engine and wheels are still connected. If the wheels stop turning, the engine naturally cannot continue to rotate. However, pressing the clutch separates the engine from the wheels, preventing the engine from stalling. The clutch pedal is the control device for the manual transmission's clutch assembly and serves as the human-machine interaction point between the car and the driver. The brake is a mechanical braking device that slows down the vehicle, also known as a decelerator. The car's brake pedal is located below the steering wheel. Pressing the brake pedal activates the brake linkage, which applies pressure to the brake pads on the brake drum, clamping the brake rotor and causing the car to slow down or stop.
18
3
Share

What Causes the Brake Pedal in a Mercedes-Benz to Be Hard to Press?

Mercedes-Benz brake pedal being hard to press is caused by a vacuum booster pump leak or failure. The force applied to the brake pedal is amplified by the brake booster pump. If it malfunctions, the brake loses its main power source, making it difficult to press. Solutions for brake failure are as follows: 1. Press the brake pedal multiple times to increase the chance of restoring braking force: In case of unexpected brake issues, repeatedly press the brake pedal several times. This applies pressure to the braking system, which may have air in the oil pipes, and with repeated pressing, there is a chance to restore braking force. 2. Turn on hazard lights to alert surrounding vehicles: In a critical situation where the brakes fail, while slowing down, turn on the hazard lights and honk to warn nearby vehicles to be cautious, then call for emergency assistance. 3. Use the handbrake: If it is a mechanical handbrake, slowly pull it up to gradually increase braking force. A sudden, forceful pull can lock the rear wheels, causing a skid, which is more dangerous. For an electronic handbrake, it can also be operated, but extra attention must be paid to steering control. Simultaneously, downshift gradually to use the engine's braking effect to limit speed. 4. Friction deceleration: Look for objects on either side that can be used for collision. Remember not to crash head-on. Hold the steering wheel firmly and use multiple slight collisions to forcibly reduce speed.
9
2
Share

What is the method for adding windshield washer fluid to the Tiguan?

The method for adding windshield washer fluid to the Tiguan involves opening the engine hood. Press and hold the device in the middle of the engine hood that can be flipped left or right, then lift the hood. After raising the hood, pull out the support rod and secure it into the hood. Then, locate the corresponding marking near the left or right front corner of the car to find the inlet for adding windshield washer fluid. Fill the windshield washer fluid reservoir to the marked level according to the scale. Vehicle Power: Taking the 2021 Tiguan X 2WD Yuexiang Edition as an example, it is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, and a maximum torque of 320Nm. It is paired with a 7-speed dual-clutch transmission.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.