How to Replace the Outer Window Trim on a 9th Generation Accord?

1 Answers
Jared
07/29/25 11:48pm
On the edge of the door, you will find a small black cover which serves as a decorative piece and needs to be removed. Take out a T-20 spline tool and use it to remove the screws securing the outer window trim. Use a large flathead screwdriver to gently pry the edge of the outer window trim to loosen it slightly. Hold the outer window trim with your fingers and gently pull it upwards to gradually separate it from the door edge.
Was this review help?
13
0
Share
More Forum Discussions

How much fuel does the rear blower resistor of Baojun 730 consume?

Heater fuel consumption has minimal impact. Using air conditioning can increase fuel consumption by approximately 1.5 liters per 100 kilometers due to the compressor. The effect of air conditioning fan speed on fuel consumption: Air conditioning significantly increases fuel consumption primarily because the compressor requires substantial power to operate. However, variations in fan speed have negligible differences in power requirements. Therefore, within certain speed limits or wind resistance ranges, using air conditioning consumes more fuel while not using it saves fuel. The impact of air conditioning fan speed on fuel consumption is negligible, including when only using the heater in winter. The effect of air conditioning temperature on fuel consumption: When it's too hot and air conditioning is necessary, avoid setting it to the coldest temperature; a moderate setting is sufficient. The most comfortable temperature range for humans is 20-25°C. Above 28°C, it feels uncomfortably hot, while below 14°C, it feels cold.
16
3
Share

How to Deal with the Great Wall Pao P200200 Fault?

Great Wall Pao P200200 fault requires cleaning the fuel filter. The following is a detailed introduction to the Great Wall Pao: 1. Power: Strong power: 2.0T engine, maximum power 140KW, maximum torque 360N·m, low displacement, high power, the best performance in the same class; meets the National VI emission standard; direct fuel injection. Twin-scroll turbocharging, dual VVT, double overhead camshaft. The Great Wall Pao is equipped with a 2.0T four-cylinder diesel engine codenamed 4D20M, which has a peak torque of 400N·m, making it the diesel engine with the strongest torque per liter. 2. Configuration: Automatic air conditioning + exclusive fragrance, independent rear air outlets, PM2.5 filtration, dust filter.
11
3
Share

What is Geely's premium brand called?

Geely's premium brand is called Lynk & Co in Chinese. More details about Geely are as follows: 1. Introduction 1: Currently, Geely's main brands are Geely Gleagle, Emgrand, and Englon. After launching the China Dragon model in 2008, Geely phased out the Geely brand, with the few remaining Geely-branded vehicles, such as the Geely Panda, being transferred to the Gleagle brand. 2. Introduction 2: Geely, a comprehensive brand, is no longer in use, but there are plans to revive it under the Gleagle name. Currently, Geely Group's main comprehensive automotive brand includes microcars, sedans, and SUVs under the Emgrand brand, mid-to-high-end sedans under the Englon brand (a joint venture with British Manganese Bronze primarily producing London taxis), and Volvo, the Swedish luxury car brand successfully acquired by Geely. Lynk & Co is Geely Group's premium automotive sub-brand.
12
1
Share

Where is the child lock located on the Edge?

The child lock on the Edge is located at the door latch. Below is relevant information about the child lock: 1. After pressing the button downward (activating the child lock) on the Edge, if the door is then closed, it cannot be opened from the inside and must be opened from the outside. 2. The car child safety lock is a feature designed to prevent children from accidentally opening the door while the vehicle is in motion, which could cause harm to them. 3. Generally, child locks are installed on the two rear doors. When the child lock function is activated, it engages a small mechanism either inside the door lock or on the outside of the lock. 4. When the child lock is on, the rear doors cannot be opened from the inside but can be opened from the outside. When the child lock function is turned off, the doors can be opened from both the inside and outside.
4
5
Share

Is the BMW X3 a mid-size SUV?

The BMW X3 is classified as a mid-size SUV. In terms of its exterior, the new model remains consistent with the 2019 version, still offering two design options: the Luxury Design Package and the M Sport Package. The side and rear profiles also match the current model. Regarding dimensions, the new vehicle measures 4717mm in length, 1891mm in width, and 1689mm in height, with a wheelbase of 2864mm. As for the configuration, the most significant change in the 2020 model is the upgrade of the xDrive25i series to a 12.3-inch full LCD instrument cluster, making it standard across all variants. Additionally, the new model has added front seat heating, removed the in-car CD player, and the 9-speaker audio system is no longer optional. The xDrive28i series now includes a hands-free tailgate and front seat heating.
17
1
Share

Why Does the Car Air Conditioner Blow Hot and Cold Intermittently?

The reasons for the car air conditioner blowing hot and cold intermittently include damaged compressor capacitor, dirty filter, and insufficient refrigerant. Introduction to Car Air Conditioning: Car air conditioning is an air conditioning system composed of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, used to regulate the temperature and humidity inside the car and provide a comfortable environment for the driver. Working Principle: When the compressor is working, it sucks in low-temperature and low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature and high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser and liquefies, turning into a liquid. The liquid refrigerant flows through the throttle device, where its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature and low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator and evaporates, turning into a gas. The gas is then sucked in by the compressor for the next cycle.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.