How to replace the low beam light of BYD F3?
3 Answers
The method to replace the low beam light of BYD F3 is: 1. Open the engine hood release lever from the driver's compartment, reach into the opened engine hood, and lift the engine hood; 2. After opening the engine hood, disconnect the nearby power connector; 3. Use a small wrench to grip the raised part of the lamp rear cover and rotate it clockwise to open the rear cover; 4. Press down firmly on the fixing bracket, lift the bracket upwards, and then the bulb can be removed and replaced with a new one. Taking the 2020 BYD F3 1.5L Manual Classic as an example: The manufacturer of this car is BYD, its class is compact car, and the energy type is gasoline.
I've changed the low beam bulbs on my BYD F3 several times myself, and it feels quite simple. First, open the hood and locate the lamp housing, usually behind the headlight assembly. Disconnect the power cable, then carefully unscrew the base of the old bulb. Avoid touching the glass part of the bulb directly with your hands, as the oil from your skin can shorten its lifespan; it's best to wear gloves. Next, take out the new bulb, align it with the socket, and insert it, then tighten the base. Make sure the new bulb matches the original model—H7 is the most common type, and you can check the model number online. After replacement, start the engine to test if the light works, and if everything is fine, close the hood. Doing it yourself can save hundreds in labor costs, and it usually takes just about 10 minutes, requiring only a Phillips screwdriver to remove the housing screws. Regularly check your lights when parked to avoid accidents during night driving.
When replacing the high beam light on a BYD F3, safety must always come first. I'm the type who always turns off the engine before working to prevent accidental electrical shock from live circuits. Open the engine hood, locate the headlight position, and use insulated gloves when removing the housing cover. Avoid touching terminals with metal tools to prevent short circuits. Carefully unscrew the old bulb, clean off any dust, and install the new bulb—make sure to get the correct H7 specification. After replacement, start the car to test if it works properly. Also, remember: if you notice the filament is burned out, check whether the fuse has blown too; otherwise, replacing the bulb will be pointless if the lights still don't work. Nighttime driving safety depends on this light—if you can't fix it yourself, call a tow truck or visit a professional shop immediately. DIY replacement saves money and hassle, but never compromise on safety.
