How to Replace the Low Beam Bulb of Roewe 350
4 Answers
Steps to replace the low beam bulb of Roewe 350: 1. Open the front hood and locate the bulb assembly. 2. Firmly pull out the blue-coiled bulb power cord (the blue ring indicates the socket). Apply moderate force to remove the socket completely, exposing the bulb base. The metal handle within the red circle is the clamp release lever. 3. First extract the socket, then press and slide the metal clamp handle rightward to loosen and remove the bulb. 4. Unbox the new bulb wearing gloves (fingerprints cause uneven heating and reduce lifespan). 5. Insert the new bulb, secure the clamp, and reconnect the power cord to complete installation.
I often change my car lights myself, and replacing the low beam bulb on the Roewe 350 is quite straightforward. First, turn off the ignition key and wait for the engine to cool down for about ten minutes to avoid burns. Open the hood, locate the headlight assembly—the low beam is positioned toward the inner side, covered by a black rubber cap. Use a Phillips screwdriver to remove the cap, then gently unplug the power connector. The old bulb is usually an H7 type—handle it carefully to avoid breakage when removing it. When handling the new bulb, avoid touching the glass directly with your hands; wear gloves or use a cloth to insert it to prevent oils from shortening its lifespan. After securing the bulb, reconnect the plug, replace the cap, and test the light by turning it on. The whole process takes about twenty minutes and can save you dozens of dollars in repair costs. If you notice dust on the lens, wipe it off occasionally to prevent overheating issues. When selecting bulbs, stick to the OEM-spec H7 55W—avoid cheap brands that burn out quickly. Doing it yourself can be quite rewarding.
Feeling a bit clumsy changing bulbs for the first time? Don't worry, it's perfectly safe. After parking and turning off the engine, wait half an hour, then open the hood and locate the low beam position behind the left headlight. There's a round cover there—unscrew it slowly without using too much force. Gently unplug the connector and remove the old bulb, noting down its model number clearly. For the new bulb, it's best to use the Roewe OEM H7 type; wear rubber gloves for protection before installation. After installing, reconnect the plug and tighten the cover securely to avoid gaps. When testing the light, have someone else check the brightness for you. If unsure, consult the owner's manual to confirm the steps before proceeding. Beginners are advised to do this during daylight for better visibility, using a phone light to prevent mistakes. Regularly check and clean the lamp socket, wiping the contacts with alcohol swabs to ensure stable connection. If shaky hands make it difficult, ask a friend to help for peace of mind.
Changing the low beam bulb of a Roewe 350 takes only ten minutes to complete quickly. After the engine cools down, open the hood and locate the inner side of the headlight assembly. Remove the rubber protective cover, unplug the connector, and gently twist the bulb to take it out. Install the new H7 bulb wearing gloves, ensuring the contacts are aligned correctly without tilting. Reconnect the plug and reassemble the protective cover. Start the car and test the lights immediately to check if they work properly. The key is to use a dedicated socket wrench tool to prevent slipping. Opting for a long-life LED replacement can last two years, saving hassle. Doing it yourself enhances daily car repair skills, and the next step to learn changing wiper blades is also simple.
