How to Replace the Letter Gear Indicator Light When It's Not Working?

What are the performance indicators of a car?

Car performance is mainly evaluated by three indicators: Maximum speed of the car: Refers to the highest driving speed that a car can achieve on a well-paved road. Acceleration time of the car: Indicates the car's acceleration capability, including standing start acceleration time and overtaking acceleration time. Standing start acceleration time refers to the time it takes for a car to start from first or second gear and gradually accelerate from a lower speed to a higher speed with maximum acceleration intensity (including selecting the appropriate shift timing). Climbing ability of the car: Is expressed by the maximum slope that a fully loaded or partially loaded car can climb on a good road surface. The first gear provides the greatest traction. Due to the speed reduction effect of the transmission and reducer, known as speed reduction and torque increase. The maximum climbing slope of an off-road vehicle is about 60%, which is approximately 31 degrees in angle measurement.

8

2

Share

Is towing allowed on highways?

Highways do not permit private towing; only rescue vehicles are allowed to tow. Below are precautions for highway driving: Fasten seat belts: Both the driver and front-seat passengers should fasten their seat belts. The driver must not answer phone calls and should avoid making sudden steering wheel movements while driving at high speeds. Do not change lanes arbitrarily: Vehicles must not change lanes at will. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance. Overtaking is only permitted using adjacent lanes, and the vehicle must return to the driving lane immediately after overtaking. Vehicles must not straddle or drive on the lane dividing line. No reversing or driving in the opposite direction: Reversing or driving in the opposite direction is prohibited. Vehicles must not cross the central divider to make U-turns or turns, nor are test drives or driving school vehicles allowed. Overtaking and parking on ramps are also prohibited. The distance between vehicles should be more than 100 meters. When the speed is below 100 km/h, the distance from the vehicle ahead in the same lane can be appropriately reduced, but the minimum distance must not be less than 50 meters.

18

5

Share

What is the difference between motorcycles with ABS and CBS?

The difference between motorcycles with ABS and CBS is that ABS prevents wheel lock-up, while CBS reduces braking distance; ABS offers superior safety performance compared to CBS; ABS is more expensive than CBS. ABS stands for Anti-lock Braking System. Its function is to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a rolling-sliding state to ensure maximum traction between the tires and the road surface. CBS refers to the Combined Braking System, which allows simultaneous braking of both front and rear wheels. Braking both wheels together ensures maximum friction between the tires and the ground, enabling the motorcycle to achieve the shortest braking distance. The ABS braking system prevents wheel lock-up, so vehicles equipped with ABS have a lower probability of skidding or losing control during emergency braking, offering higher safety performance. The CBS system can also help prevent loss of control to some extent, but its primary function is to reduce braking distance. Therefore, vehicles with CBS have lower safety performance compared to those with ABS. Typically, vehicles equipped with ABS are high-end models and are more expensive, while those with CBS are generally mid-to-low-end models and are slightly cheaper.

2

Share

What Causes the Jerking Sensation When Braking?

Braking with a jerking sensation is due to significant wear of brake pads, issues with transmission gear programming, internal contamination and impurities in the transmission, or poor transmission cooling. The specific reasons are as follows: Significant wear of brake pads: Severe wear or aging of the car's brake pads can cause a jerking sensation when braking. It is advisable to replace the brake pads promptly. Transmission gear programming issues: The transmission control system needs to be reprogrammed. Internal contamination and impurities in the transmission: Contamination or impurities inside the transmission can prevent effective regulation of transmission oil pressure, leading to jerking. Poor transmission cooling: This can cause abnormal high temperatures in the transmission, affecting the performance of the transmission oil. If the temperature exceeds 120 degrees Celsius, the rubber sealing materials in the transmission can harden, leading to oil leaks, which in turn affect oil pressure and cause jerking.

6

4

Share

What Causes the Shaking When Starting a New Car in First Gear?

Here are the reasons why a new car shakes when starting in first gear: Clutch Shudder: Let the engine idle, engage a low gear, slowly release the clutch pedal, and increase the throttle to start. If the car body shakes at this time, it indicates clutch shudder. Uneven Pressure Distribution Between the Driving and Driven Discs: Frequently engaged clutch pressure springs with uneven elasticity, inconsistent adjustment of the release levers, and/or uneven ends of the diaphragm spring fingers can lead to asynchronous pressure application times, uneven force distribution on the pressure plate, or even tilting of the pressure plate, resulting in poor contact between the driving and driven discs and causing clutch shudder. Weakened Damping Spring Elasticity: Weakened elasticity of the clutch torsional damping springs, weakened elasticity of the clutch pressure springs, or cracks in the diaphragm spring can all cause shaking when the clutch engages. The solution in this case is to replace the springs.

4

0

Share

What Are the Five Major Functions of Engine Oil?

Here are the five major functions of engine oil: Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. Auxiliary Cooling: Due to its relatively low specific heat value and its location inside the engine, engine oil itself does not have a cooling function. However, during engine operation, the heat energy generated by fuel combustion can be carried back to the oil tank by the engine oil and then dissipated into the air, assisting the radiator in cooling the engine. Cleaning: Engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation. The flow of lubricating oil helps to wash away contaminants generated on the working surfaces of the parts. Sealing and Leak Prevention: Engine oil can form a sealing ring between the piston rings and the piston, reducing gas leakage and preventing the entry of external pollutants. Rust and Corrosion Prevention: Lubricating oil can adhere to the surfaces of parts, preventing contact with water, air, acidic substances, and harmful gases.

12

4

Share

How to Replace the Letter Gear Indicator Light When It's Not Working?

What are the performance indicators of a car?

Is towing allowed on highways?

What is the difference between motorcycles with ABS and CBS?

What Causes the Jerking Sensation When Braking?

What Causes the Shaking When Starting a New Car in First Gear?

What Are the Five Major Functions of Engine Oil?

How to Open the Drain Holes on the Car Chassis?

How to test if ETC works after installation?

Do car tires have inner tubes?

Does idling the car with the heater on damage the vehicle?