How to Replace the Key Battery for Wuling Hongguang?
4 Answers
To replace the battery in the Wuling Hongguang car key, follow these steps: 1. First, open the remote key. 2. Find a coin or a flathead screwdriver to use as a tool to pry open the key cover by inserting it into the key slot. 3. With the side bearing the logo facing upwards, use the tool to lift upwards, applying some force (it might be tight if it's the first time prying), and it should open easily. At this point, you can see the battery. 4. Use a pointed object (such as one end of a paperclip) to pry out the battery. 5. Replace the battery, and after replacement, securely fasten the cover.
Changing the battery for the Wuling Hongguang's key is not difficult, as I've done it several times myself. When the remote key's buttons become unresponsive after prolonged use, it's time to replace the battery. First, prepare a new battery—the model is CR2032, which can be bought at any convenience store, so make sure not to get the wrong one. Take the key and look for a seam or clip along the edge. Use a small coin or another key to gently pry open the casing, applying soft pressure to avoid damaging it. Once opened, you'll see a small round battery inside. Note the orientation of the old battery's positive side, then remove it with your fingernail or tweezers. When inserting the new battery, ensure the positive side faces the correct direction and sits flat. Then, close the cover and press firmly until you hear a click. After that, test the remote unlock button—if it works, you're good to go. Changing the battery is a simple task, usually needed once a year, so you won't run into any issues.
Replacing the battery for the Wuling Hongguang key is quite quick. When the remote stops working or the buttons respond slowly, it's likely the battery is dead, so grab a new CR2032 battery promptly. Use a coin to gently pry open the cover from the side gap of the key, avoiding hard pulls to prevent damage to the components. Once opened, you'll find the small battery inside; remove the old one and when placing the new one, pay attention to the positive and negative directions to avoid reversing them—usually, just put it back the same way as before. Close the cover firmly and press it securely, then finally test the remote functions to see if they've been restored. For daily maintenance, remember to check the battery level every six months to extend the key's lifespan.
As a new driver, I figured it out after replacing the battery in my Wuling Hongguang's key. If the remote stops working, just buy a CR2032 battery from the supermarket for a few bucks. Look for a small slit on the back of the key, and gently pry open the casing with a knife or coin—take your time. Remove the old battery, note which side was facing up, and insert the new one the same way. Snap the casing back together firmly, test the buttons, and you're done. It's really simple; my first time took just five minutes. Also, storing the key properly after use instead of tossing it around can help prevent the battery from draining too quickly.
