How to Replace the Key Battery for the Touran?

1 Answers
RosalieLee
07/29/25 1:41pm
Method to replace the key battery for the Touran: 1. Place the remote key facing upwards, use a small flat-head screwdriver to gently pry into the middle of the gap. The key will slightly separate, creating a gap of about 2 millimeters; 2. Separate the key into two halves, focusing on the part where the battery is installed. The prying action is intended to release the hook from its slot; 3. Gently separate the key along the middle gap, remove the old battery, and replace it with a new one. The Touran is an MPV model under SAIC Volkswagen, with dimensions of 4395 mm in length, 1794 mm in width, and 1634 mm in height, and a wheelbase of 2678 mm. In terms of suspension, the Touran features a McPherson strut front suspension and a four-link independent rear suspension.
Was this review help?
2
1
Share
More Forum Discussions

What is the Difference Between Waxing and Glazing?

The differences between waxing and glazing: 1. Different compositions: Car wax mainly consists of natural or synthetic wax, while glaze primarily derives from petroleum. 2. Different tools: Waxing can be done using a waxing sponge to apply the car wax, whereas glazing requires a specialized orbital polisher. 3. Different durability: Waxing typically lasts for about 1 to 2 months, while glazing is more durable, lasting around 3 months. Waxing involves applying a layer of wax to the car's paint surface, effectively protecting the paint and enhancing its gloss. Glazing, on the other hand, uses the high-speed vibration and friction of an orbital polisher to penetrate the glaze into the paint, forming a protective layer that effectively safeguards the car's paint.
6
2
Share

What is the minimum speed limit for second gear?

The minimum speed for second gear is 10 kilometers per hour. If the speed falls below 10 km/h, continuing to drive in second gear may easily cause the engine to stall. When beginners drive, they often judge gear shifts based on vehicle speed. In reality, each gear does not have a specific speed requirement; instead, gear shifts should be determined by the engine's RPM. Engine RPM and gear shift timing: Start in first gear with the engine RPM around 1000-1500 and the speed at 10 km/h, then shift to second gear. In second gear, press the accelerator to reach an engine RPM of around 1500-2000 and a speed of 30 km/h, then release the accelerator and shift to third gear. In third gear, press the accelerator to reach an engine RPM of around 1500-2000 and a speed of 40 km/h, then release the accelerator and shift to fourth gear. In fourth gear, press the accelerator to reach an engine RPM of around 1500-2000 and a speed of 50-70 km/h, then release the accelerator and shift to fifth gear. In fifth gear, press the accelerator to reach an engine RPM of around 1500-3000 and a speed of 80-120 km/h. Precautions: Under normal driving conditions, there is no need to stay in second gear for extended periods. Lower gears are suitable for uphill and downhill driving. Uphill driving allows the car to climb more powerfully, while downhill driving helps control the speed without prolonged braking, preventing brake overheating and reduced braking performance.
6
4
Share

Where is the rearview mirror heating switch for the 2021 Yidong Plus?

The rearview mirror heating switch for the Yidong Plus is located on the air conditioning control panel. The rearview mirror heating and rear windshield heating share the same switch. When the vehicle's power is ON, pressing the button near the AC switch will automatically activate the rearview mirror heating. This feature is particularly useful in rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for the driver to manually wipe the mirror and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to activate it. The other is located on the air conditioning control panel—pressing the heating button will activate it. No manual angle adjustment is required, as the driver's side has an adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature, usually between 35-60 degrees Celsius, within a few minutes. The heat is then distributed across the left and right rearview mirrors. As the temperature rises, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively removing frost and condensation. However, if the rain is particularly heavy, the effect may be diminished and less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror. These wires consume a significant amount of power. Therefore, when using this function, ensure the vehicle is running. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery, which could hinder the vehicle's ability to start. Other methods for defogging rearview mirrors include: Opening windows slightly to create air convection between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.
15
0
Share

What are the effects of not replacing spark plugs for a long time?

The effects of not replacing spark plugs for a long time: 1. Insufficient vehicle power; 2. Difficulty in ignition; 3. The vehicle may suddenly stall; 4. Engine vibration; 5. Increased fuel consumption. The function of spark plugs is to ignite the engine by generating sparks between two electrodes. You can imagine the electrodes of a spark plug as the striking material on the side of a matchbox—over time, it wears out, making ignition much harder. Spark plugs have a limited lifespan, which varies depending on the material. Spark plugs are divided into ordinary copper-core (nickel alloy) spark plugs and precious metal spark plugs, with the main difference lying in the electrode part.
20
3
Share

From Which Side Should a Motor Vehicle Overtake?

Motor vehicles should overtake from the left side. Overtaking from the left provides better visibility, as it only requires a slight deviation to the left to observe the road conditions ahead. Due to differences in driving methods, overtaking from the right can obstruct visibility, making it difficult to ensure driving safety during the maneuver. Techniques for overtaking: accelerate and merge into the adjacent lane, then accelerate straight ahead to pass the vehicle being overtaken until a safe distance is achieved before merging back into the original lane. The purpose of overtaking is to achieve faster passage. Overtaking should be completed safely and swiftly, so both accelerating and merging actions need to be executed cleanly and efficiently, all while ensuring safety conditions are met.
10
0
Share

Which country is Wiesmann from?

Wiesmann is from Germany, with its headquarters located in Dulman, Germany, and its logo features a lizard image. The Wiesmann series models include: Wiesmann MF30 and MF3, Wiesmann GT, and Wiesmann MF5. Among them, the Wiesmann GT is the third supercar from Wiesmann, boasting a striking retro style. In terms of appearance, the Wiesmann GT features rounded rear lines paired with a relatively simple dual taillight design, and a projector headlight assembly composed of three units, giving the car a dynamic and minimalist taste. In terms of body dimensions, the Wiesmann GT measures 4220mm in length, 1860mm in width, and 1200mm in height, making it a 3-door, 2-seater hardtop sports car.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.