How to Replace the Key Battery for DS6?

1 Answers
CalvinFitz
07/29/25 7:16pm
Method to replace the key battery for DS6: 1. Press the button on the electronic key to release the mechanical key; 2. Insert a screwdriver into the small notch at the top covered by the mechanical key, gently pry upwards, and the electronic key will separate; 3. At this point, the battery will be visible. Remove the old battery and replace it with a new one; 4. Snap the two parts back together, press the edges to restore the clips to their original position; 5. Insert the mechanical key back into the electronic key to lock it. In terms of body dimensions, the DS6 measures 4553 mm in length, 1858 mm in width, and 1600 mm in height, with a wheelbase of 2732 mm. For safety configurations, the DS6 comes standard with ABS, EBD, EBA, ASR, ESP, front and side airbags, side curtain airbags, tire pressure monitoring, and other practical features.
Was this review help?
3
0
Share
More Forum Discussions

How to Prevent Mice from Entering the Car Engine?

You can place mouse traps, sticky traps, mothballs, rodent repellents, or cooling oil in the engine compartment to prevent mice from entering the car engine. Below is some relevant information about engines: 1. Introduction: An engine is a machine capable of converting non-mechanical energy into mechanical energy. 2. Classification: Engines include internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines and steam engines), jet engines, electric motors, and more. 3. External Combustion Engine: An external combustion engine refers to an engine where the fuel burns outside the engine. 4. Internal Combustion Engine: An internal combustion engine, specifically a reciprocating piston engine, differs significantly from external combustion engines in that the fuel burns inside it. There are many types of internal combustion engines, with common examples being gasoline engines and diesel engines, which are typical internal combustion engines.
17
2
Share

Should the Air Conditioning Be Turned Off Before Engine Shutdown?

It is necessary to turn off the air conditioning before engine shutdown. If the air conditioning is not turned off before shutdown, it will automatically restart when the engine is next started, which unnecessarily increases the engine load. However, it is important to note that the external circulation should be turned on either before or after shutdown. This is because the evaporator, which has been continuously cooling, will accumulate many small water droplets on its surface after parking. If left unattended, bacteria can grow inside the evaporator over time, leading to a musty odor. Additional information is as follows: 1. Switching between internal and external circulation is possible: Modern vehicle automatic air conditioning systems can switch between internal and external circulation, relying on sensors to detect air quality. 2. The temperature sensor affects automatic air conditioning circulation switching: In lower-end vehicles, the only sensor affecting the automatic air conditioning's circulation switching is the temperature sensor. It transmits the interior temperature and the set temperature to the air conditioning system, which then uses actuators to switch the circulation mode. To activate internal circulation in automatic air conditioning, increase the temperature difference; to activate external circulation, decrease the temperature difference. However, even when the air conditioning automatically switches to internal circulation, there is no indicator light inside the vehicle to signal this.
17
0
Share

Why is there no response when inserting a USB drive into the GAC Trumpchi GS5?

There is no response when inserting a USB drive into the GAC Trumpchi GS5 due to incorrect file format, improper formatting, excessively large USB drive memory, poor compatibility, or USB drive damage. Below are the detailed explanations: Incorrect file format: The USB interface can play audio files in formats such as FLAC, MP3, and WAV. Improper USB drive formatting: The USB drive needs to be formatted in FAT32 or Exfat format. Excessively large USB drive memory: It is recommended to use a smaller USB drive with a memory capacity of less than 8GB. Poor compatibility: Avoid using mini USB drives as their controller compatibility is poor, which may lead to recognition issues. USB drive damage: If the USB drive still doesn't work after trying all the above methods, or if the USB drive itself is damaged, it is necessary to replace it with a new one.
20
5
Share

How to Refuel a Car for Beginners

Open the fuel tank valve, inform the staff of the appropriate gasoline type, select the required fuel amount, and ensure the fuel cap is closed before starting the engine after refueling. More relevant information is as follows: Precautions for beginners when refueling a car: 1. Try not to wait until the fuel warning light comes on before refueling: Because the fuel pump is located inside the fuel tank, it operates continuously at high temperatures and is effectively cooled by being immersed in fuel. When the fuel warning light comes on, it indicates that the fuel level is below the fuel pump. If you always wait until the light comes on to refuel, it will shorten the service life of the fuel pump. Too little fuel or running out of fuel may also burn out the fuel pump. Be extra cautious if the car has been driven over 30,000 kilometers. 2. Try to refuel in the morning or evening: During these times, the temperature is lower than during the day, and the fuel density is higher, so theoretically, refueling during these times may be slightly cheaper. 3. Avoid refueling immediately after the gas station has just unloaded fuel: Because there is always some water and sediment impurities at the bottom of the fuel tank, unloading fuel can stir up these impurities and mix them with the fuel. If you accidentally refuel with this contaminated fuel, it can clog the fuel lines and damage the car's engine.
5
3
Share

Does starting the car without driving consume fuel?

Starting the car without driving basically does not increase the load or consume fuel. Here is some information about fuel consumption: 1. Introduction: Generally refers to the gasoline consumption per 100 kilometers, which is a theoretical indicator of the vehicle. 2. Methods to reduce fuel consumption: The longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time; avoid rapid acceleration, slamming the gas pedal, and driving at low RPMs. 3. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.
2
0
Share

Is Engine Carbon Cleaner Additive Effective?

Cleaning engine carbon deposits with additives is effective. The role of carbon deposits: 1. Definition of carbon cleaner: A compound of high-efficiency surfactants, emulsions, corrosion inhibitors and other additives, appearing as a colorless transparent liquid, diluted with water at a 3:6 concentration when used. It has strong cleaning capabilities for mineral oils, animal and vegetable oils, and other greasy dirt. 2. Carbon deposits include two concepts: One concept is engine carbon deposits: A coking-like substance produced by unsaturated olefins and gums in fuel under high-temperature conditions during engine operation. The second concept is carbon deposits in electrical discharge machining, which should be avoided as much as possible, especially in precision mold processing, where it can have a fatal impact.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.