How to Replace the Key Battery for Changan CS75?
2 Answers
To replace the battery of the Changan CS75 remote key, follow these steps: 1. Insert a flat-blade screwdriver into the contact slot of the back cover and pry it open to separate it from the wireless remote. 2. Insert the screwdriver into the middle of the contact slot, turn it a quarter turn, and pry open the back cover of the electronic key. 3. Install the battery with the positive terminal facing upward into the back cover of the wireless remote, then press the cover plate to secure it in place. Below are some precautions for replacing the smart key battery: 1. Avoid touching the circuit board or battery terminals. 2. The remote is waterproof. However, if it gets wet, dry it immediately. 3. When replacing the battery, ensure that the electrode contact points are free from dirt, grease, and other foreign substances.
The other day my car key stopped working, and after searching online, I found it was a battery issue. I used a coin to pry open the shell of my Changan CS75 key, took out the old CR2032 battery, bought a new one, and installed it according to the positive pole indicator. After reassembling, the buttons worked again—super happy! It saved me money and time, taking only ten minutes. I found guides and shared experiences on online forums, and everything has been working fine since. With my DIY experience, I recommend trying a battery replacement first if you encounter a similar issue.
