How to Replace the Key Battery for a Hyundai Vehicle?

1 Answers
OGabriela
07/29/25 11:17pm
Modern car key battery replacement method is: 1. Press the small silver button at the top of the car key; 2. Grasp the top and pull out the mechanical key; 3. Insert the mechanical key into the slot and twist to pry open the key cover; 4. After removing the circuit board, the battery can be seen; 5. Remove the old battery and insert the new one; 6. Reassemble the circuit board and key cover to complete the key battery replacement. Taking the 2021 Hyundai Elantra as an example, it is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 140ps, maximum power of 103kw, maximum torque of 211nm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
14
2
Share
More Forum Discussions

What are the reasons for a dash cam constantly rebooting?

The reasons for a dash cam constantly rebooting are: 1. Power supply failure; 2. Wiring issues; 3. Memory card problems; 4. Issues with the dash cam itself. The solutions for a dash cam constantly rebooting are: 1. Unplug the dash cam's power supply and test with another device to check for power supply failure; 2. Reconnect the power cable; 3. Format the memory card or insert a piece of paper behind the memory card; 4. Reset the dash cam to factory settings. The functions of a dash cam are: 1. Protecting the car owner's legal rights and preventing fraud; 2. Determining liability in accidents; 3. Serving as a parking monitor; 4. Capturing scenic views.
8
5
Share

What are the features of CarLife in cars?

CarLife is a car networking solution launched by Baidu at the 'Connected Cars, Smart and Measured' strategy conference on January 27, 2015. On the car's end, whether it's Linux, QNX, or Android, Baidu CarLife can be well adapted. The following is a detailed introduction to the main features of CarLife: 1. Map Navigation: Voice input, intelligent broadcast, automotive-grade HMI interface design, and connection to car data can achieve high-precision navigation. 2. Music: Play local music, listen to online music or radio, and support third-party service integration. 3. Phone: Make calls, answer incoming calls, synchronize and view mobile phone contacts, and check call history.
5
0
Share

How to Use the Bora's Air Conditioning?

The method for using the Bora's air conditioning varies depending on the situation: 1. Manual air conditioning: Set the air circulation mode to internal circulation, adjust the temperature using the temperature control buttons, and press the A or C button to turn off the air conditioning. 2. Automatic air conditioning: Press the AUTO button and adjust the temperature. Types of car air conditioning can be categorized based on different criteria: 1. By driving method: Independent and non-independent. 2. By performance: Single-function and combined heating/cooling. 3. By control method: Manual and electrically controlled pneumatic adjustment. 4. By adjustment method: Fully automatic adjustment and microcomputer-controlled fully automatic adjustment.
16
0
Share

Why Does the Car Shake at Idle Speed?

Reasons why the car shakes at idle speed: 1. The throttle is dirty or the fuel injector has excessive carbon deposits. 2. Issues with the ignition system. At this time, it is necessary to check the working condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or bad spark plug firing can also cause such faults. 3. Unstable oil pressure. If you have already cleaned the engine carbon deposits, cleaned the throttle, replaced the oil pads and spark plugs, but still find the car shaking at idle speed, it is recommended to go to a 4S shop to check whether the fuel supply pressure and the intake pressure sensor are normal. 4. Aging of the engine mounts.
2
2
Share

How to use Mazda i-stop?

To use Mazda i-stop, press and hold the i-stop button for more than 2 seconds to toggle it on or off. The i-stop button is located on the lower left panel of the steering wheel. When i-stop is activated, the dashboard will display it in green; when deactivated, it will show in orange. The conditions for i-stop activation are: 1. The engine is fully warmed up and the hood is closed; 2. All doors and windows are closed; 3. The vehicle is stationary and the battery is in good condition; 4. The driver's seatbelt is fastened; 5. The windshield defroster is turned off; 6. The air conditioning is on; 7. The air conditioning temperature is set to match the interior temperature.
19
5
Share

What to Do When the Seat Belt Gets Stuck?

If the seat belt gets stuck, you can try to gently retract and extend it to restore its function. In case of a mechanical failure, it is recommended to seek professional repair. Improper use of a stuck seat belt can cause deformation, making it prone to jamming at the entry and exit points. This situation is relatively simple to resolve; usually, straightening the seat belt and slowly pulling it out will suffice. A seat belt is a safety device used in equipment, such as aircraft or during high-altitude work and performances, to ensure safety. The main materials used are polyester, polypropylene, and nylon. A seat belt is not just the webbing; besides the webbing, it consists of other assembled components.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.