How to Replace the Inner Door Handle of Baojun 630?
2 Answers
Prepare the necessary tools for removing the door handle: a flathead screwdriver and a T-20 Torx screwdriver. Take out the small flathead screwdriver and gently pry open the small cover from its notch to remove the outer shell. Open the car door and unscrew the door handle. Use the small flathead screwdriver to remove the small rubber pad on the edge of the door. Take out the T-20 Torx screwdriver and use it to remove the screw. Keep the removed screw safely for reinstallation. Then, pull the handle backward slightly before pulling it outward to remove the door handle completely.
To replace the inner door handle of a Baojun 630, I recommend preparing tools such as a Phillips screwdriver, plastic pry bar, and gloves in advance. The door trim panel usually has screws hidden in the handle recess or the storage compartment below. After unscrewing them, carefully pry open the clips with the pry bar to avoid damage. Once the door panel is removed, you can see the door handle connected to a cable or linkage. Gently remove the old handle, and when installing the new OEM part, align it properly to ensure smooth cable operation. After installation, test if the door lock opens normally before reattaching and securing the door panel. Be careful to align the clips and avoid forcing them; if the linkage is rusty, apply some lubricant to prevent sticking. The entire process takes about 30 minutes, and beginners are advised to refer to vehicle diagrams or video guides beforehand. A common mistake is applying too much force and breaking the clips, leading to loose panels and rattling noises—it’s best to buy spare clips in case.
