How to replace the headlight of Haval H6?
2 Answers
Haval H6 headlight replacement method: 1. Unplug the power socket of the bulb. When unplugging the bulb power socket, apply moderate force to avoid loosening the socket wiring or damaging the bulb power plug; 2. After disconnecting the power interface, remove the waterproof cover behind the bulb. The waterproof cover of the headlight is mostly made of soft rubber, and some models are equipped with a soft plastic waterproof cover. Gently pull the waterproof cover off; 3. Remove the bulb from the reflector. When removing the bulb, use your fingers to pinch the wire clips on both sides, and then pull the bulb out after it is loosened; 4. Place the new bulb into the reflector and align it with the fixed position of the bulb. There are several fixed positions on the bulb base. Install it by reversing the steps of removing the old bulb; 5. When covering the waterproof cover, ensure that the edge of the waterproof cover is completely aligned with the fixed position. Finally, connect the headlight power socket.
I've replaced the headlights on my Haval H6 several times, so here's some DIY experience to share. You'll need a new bulb, and the model number should be checked in the owner's manual or matched online. Before starting, make sure the car is turned off with a cold engine, and prepare gloves and basic tools to avoid scratching the car paint. Steps: Open the engine hood, locate the headlight assembly, unscrew the rear dust cover, and gently unplug the wiring connector. Turn the old bulb counterclockwise to remove it—never touch the bulb surface with bare hands as oil residue can shorten its lifespan. Install the new bulb, secure it, reconnect the wiring, and tightly close the cover. Remember to test the lights to ensure they work, and don’t forget to clean the headlight cover to enhance light performance. DIY replacement saves money and builds skills, but if it’s too complicated, it’s best to seek professional help to ensure safety.
