How to Replace the Headlight Bulb on a Haval M6?

[LaAdalynn]

The method to replace the headlight bulb on a Haval M6 is: Open the engine hood, locate the position of the low beam light, rotate and remove the lamp cover, take out the old bulb, and install the new bulb. Taking the 2021 Haval M6 as an example, its body dimensions are: length 4664mm, width 1830mm, height 1729mm, wheelbase 2680mm, and fuel tank capacity 55l. The 2021 Haval M6 is equipped with a 1.5T turbocharged engine, with a maximum power of 110kW and a maximum torque of 210Nm, paired with a 6-speed manual transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of double-wishbone independent suspension.

[MatthewAnn]

Last month, I just helped a friend replace the headlight bulb on a Haval M6, and it felt quite straightforward. First, make sure the car is turned off and the engine has cooled down to avoid burns. Then, pop open the hood and locate the black cover at the back of the headlight assembly—it’s secured with either a twist knob or clips. After unscrewing the cover, carefully twist the old bulb counterclockwise to remove it, but avoid touching the glass part directly with your hands, as oils from your skin can shorten the bulb’s lifespan. Next, when buying a new bulb, confirm the model matches—usually H7 or similar. Gently insert and secure the new bulb, then tighten the cover by twisting it back into place. Finally, turn on the headlights to test if the brightness is normal. The whole process takes about 15 minutes, just be careful not to use excessive force and damage the plastic parts. Regularly checking your bulbs can prevent nighttime driving hazards.

[MacIker]

As a car owner, I recently replaced the headlight bulbs on my Haval M6 myself. The steps were straightforward: park the car, turn off the engine, and wait a few minutes for the components to cool down. Open the hood, locate the round or square protective cover at the back of the headlight assembly—it has screw threads—just twist it off gently. Wear gloves when removing the old bulb to prevent contamination, then install the new bulb by aligning it with the slot and pressing it in, making sure not to reverse the direction. After completing the installation, put the cover back on, start the car, and test the lights. Remember to choose the correct bulb model, such as the factory-specified H7, otherwise, the brightness may be poor, and the bulb may burn out easily. It took me 10 minutes to finish, and I realized that replacing bulbs regularly can save on repair shop costs. Checking the manual before starting is safer. Safety first—if there’s no light, pull over immediately.

[DiValentina]

Replacing the HAVAL M6 headlight bulb requires attention to safety. Before each operation, I turn off the car, remove the key, wear anti-slip gloves, and open the hood. Locate the protective cover at the rear of the headlight, unscrew and remove it; carefully pull out the old bulb, avoiding contact with the glass part. When installing the new bulb, use a matching model such as H7 and ensure the connector is secure. After completion, reattach the cover and test the lights to avoid errors. The entire process is simple and quick, taking about 12 minutes. Emphasize accident prevention, as regular bulb checks can extend headlight lifespan. Beginners are advised to start with the basics and not skip steps to ensure stable lighting.