How to Replace the Headlight Bulb of Arrizo 5?
2 Answers
Arrizo 5 bulb replacement steps are as follows: 1. Turn off the vehicle power, open the engine hood, and wait until the engine and cooling system are in a cold state before starting the replacement. Locate the headlight plug that needs to be replaced from the rear of the headlight and unplug it. 2. Rotate the old bulb counterclockwise to remove it and install the new bulb. Be careful not to hold the bulb glass directly with your fingers, as fingerprints left on it will evaporate when the bulb is lit, depositing on the mirror surface and dimming the beam. 3. Reinstall the replaced bulb back into the socket and plug in the connector. 4. After installation, test the bulb effect. If necessary, adjust the light projection angle using a cross-head screwdriver at the adjustment port behind the headlight.
Replacing the headlight bulb of an Arrizo 5 is actually not difficult, and I often do it myself. First, park the car securely, turn off the engine, and engage the handbrake, then open the hood. Locate the socket assembly at the rear of the headlight, which has plastic clips or a twist-off cover. Gently unscrew the cover, remove the old bulb, being careful not to touch the glass part directly with your hands to avoid oil stains and damage. Buy the correct new bulb model, such as an H7 55W bulb, and when inserting it, listen for a click sound to confirm it's securely fixed. Then, replace the cover and start the car to test the lights. If the beam is uneven, adjust the headlight height adjuster. Wear cotton gloves throughout the process to protect against dirt. Doing it yourself is simple and cost-effective, and each time you can also check for wiring aging issues, preventing accidents when driving at night.
