How to Replace the Gear Knob of Excelle?

6.8-meter Truck Freight Calculation

6.8-meter trucks generally consume 25-30 liters of fuel per 100 kilometers. Since they are typically used for short-distance transportation, fuel costs account for 50%-60% of the total transportation expenses. Additional calculations are required for off-peak seasons, return trips, multiple stops, and waiting times. Below is more information about 6.8-meter trucks: 1. Dimensions of a 6.8-meter truck: The cargo compartment is 6.8 meters long, 2.35 meters wide, with a floor height of 1.25 meters from the ground, sideboard height of 1.8 meters, total height of 4 meters, loadable height of 2.65 meters, and total truck length of 9.2 meters. 2. New regulations on load capacity for 6.8-meter trucks: According to the new regulations for 2-axle trucks, the total weight of the truck and its cargo should not exceed 18 tons. A 6.8-meter truck, which is a 2-axle truck, weighs approximately 8 tons, giving it a load capacity of 10 tons. 3. Calculation of cargo volume for a 6.8-meter truck: The cargo volume for a 6.8-meter high-side truck is calculated by multiplying the internal length, width, and height of the cargo compartment. For example, a 6.8-meter high-side truck can carry 38 cubic meters (6.7m × 2.3m × 2.5m) when space is fully utilized, though typically it can carry around 35 cubic meters.

13

4

Share

What is the mechanism of electrochemical corrosion?

Electrochemical corrosion occurs when metal materials come into contact with an electrolyte solution, leading to corrosion through electrode reactions. Here is a partial introduction to electrochemical corrosion: 1. Overview: Electrochemical corrosion is a redox reaction. In this reaction, the metal loses electrons and undergoes oxidation, a process known as the anodic reaction. The reaction products are metal ions that enter the medium or metal oxides (or insoluble metal salts) that form on the metal surface. Meanwhile, substances in the medium gain electrons from the metal surface and undergo reduction, a process known as the cathodic reaction. 2. Characteristics of the reaction process: Under certain conditions, oxidizers in non-electrolytes directly interact with atoms on the metal surface to form corrosion products.

1

Share

What transmission is equipped in the Kia K5?

The Kia K5 is equipped with a 7-speed dual-clutch transmission. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output shaft and input shaft. The transmission consists of a gear transmission mechanism and an operating mechanism. The Kia K5 is a mid-size sedan under Dongfeng Yueda Kia, with exterior dimensions of 4720mm in length, 1815mm in width, and 1465mm in height, and a wheelbase of 2770mm. The Kia K5 is powered by a 1.6T turbocharged engine and a 1.8L naturally aspirated engine, paired with a 7-speed dual-clutch transmission and a 6-speed automatic manual transmission.

13

5

Share

What does Honda CR-V 240 Turbo mean?

Honda CR-V 240 Turbo refers to the Honda CR-V equipped with a 1.5-liter turbocharged engine, where: 1. 240: indicates the vehicle's maximum torque of 240N·m. 2. Turbo: refers to the turbocharged engine. Relevant information about the Honda CR-V is as follows: 1. Body dimensions: length 4585mm, width 1855mm, height 1679mm, wheelbase 2660mm. 2. Suspension: front suspension is MacPherson strut independent suspension, rear suspension is multi-link independent suspension. 3. Powertrain: it is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 146ps, maximum power of 107kw, maximum torque of 175nm, matched with an electronic continuously variable transmission.

16

4

Share

What are the differences between the Great Wall Haval H2 and H2s?

Here are the differences between the Great Wall Haval H2 and H2s: 1. Exterior: The Haval H2 has a more stable appearance, while the H2s is more sporty. 2. Dimensions: The H2 measures 4365×1814×1695mm in length, width, and height, with a wheelbase of 2560mm; the H2s measures 4146×1772×1638mm, with a wheelbase of 2550mm. 3. Rear suspension type: Both the Haval H2 and H2s use MacPherson strut independent suspension for the front, but the former has a multi-link independent suspension for the rear, while the latter uses a torsion beam non-independent suspension.

9

1

Share

Do cars still have a break-in period?

Nowadays, cars still have a break-in period. Here is some information about the car break-in period: 1. Precautions: In the initial stage of the break-in period, the mileage is generally below 500 kilometers. At this time, the speed should not be too fast, it is best to keep it between 60-70 km/h, and the engine speed should not exceed 2200 rpm. When the mileage reaches about 500-1000 kilometers, which is the middle stage of the break-in period, the speed can be increased from 60-70 km/h to 90-100 km/h, with the engine speed kept below 2500 rpm for optimal performance. When the mileage reaches about 1000-1500 kilometers, which is the later stage of the break-in period, the speed can be increased to below 120 km/h. The break-in process should be gradual, and the engine speed should not exceed 3000 rpm. 2. Purpose: A car is a mechanical device with many interacting components that need to work together precisely. The break-in period allows the mating surfaces of various parts to fit more closely and work together more tightly.

9

5

Share

How to Replace the Gear Knob of Excelle?

6.8-meter Truck Freight Calculation

What is the mechanism of electrochemical corrosion?

What transmission is equipped in the Kia K5?

What does Honda CR-V 240 Turbo mean?

What are the differences between the Great Wall Haval H2 and H2s?

Do cars still have a break-in period?

How to Adjust Overly Advanced Ignition Timing?

What vehicle components should be checked before driving on the highway?

How Many Kilometers Should a Truck's Wheel Hubs Be Maintained?

How to remove the adhesive from the car's ETC?