How to Replace the Fuel Filter on a Baojun 730?
2 Answers
To replace the fuel filter on a Baojun 730, first drain the fuel, then clean or replace it, tighten the new filter, and add engine oil to complete the replacement. Below is relevant information about the fuel filter: Replacement Interval: The replacement interval for the Baojun 730 fuel filter is every 20,000 kilometers. Function of the Fuel Filter: The fuel filter's role is to remove water and impurities from the gasoline. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. As the volume increases and the flow rate decreases, heavier water and impurity particles settle at the bottom of the bowl, while lighter impurities flow with the fuel toward the filter element. Clean fuel then passes through the fine pores of the filter element into its interior and exits via the fuel pipe.
Replacing the fuel filter on the Baojun 730 isn't actually difficult—I've done it myself several times. First, park the car on level ground, turn off the engine, and engage the handbrake, ensuring the engine is cool. The fuel filter is usually located under the chassis near the middle or close to the fuel tank—you'll need to crawl underneath to spot a small cylindrical component. Use a wrench to loosen the clamp connections; some fuel may spill, so keep an oil-absorbent cloth handy. Before removing the old filter, note the directional markings, then align the new filter correctly and tighten the connections, ensuring the sealing ring is properly installed. After reassembly, start the engine to test for leaks. Replace it every 20,000 kilometers to prevent fuel line clogs and improve engine efficiency. All you need are basic wrenches and gloves—DIY replacement saves you around a hundred bucks in labor costs.
