How to Replace the Coolant in Zotye Damai X5 Radiator?
3 Answers
Steps to replace the coolant: 1. Open the engine hood and unscrew the radiator cap. 2. Turn on the drain valve at the bottom of the radiator to drain the existing fluid. After filling the radiator with coolant, start the engine to circulate the coolant in the radiator. 3. Once the operation is complete, inspect the entire radiator and pipelines for any leaks. If leaks are found, drain the coolant again, address the leakage issue, and then restart the process. Below is some information about coolant: 1. Coolant consists of 50% pure water, 40% methanol, and 10% other substances including dyes, corrosion inhibitors, and scale removers. 2. Compared to tap water, ethylene glycol is most notable for its antifreeze properties, whereas water cannot prevent freezing. Additionally, ethylene glycol has a high boiling point, low volatility, moderate viscosity that changes little with temperature, and excellent thermal stability. Therefore, ethylene glycol-based coolant is an ideal cooling solution.
I often change the coolant for my car by myself, which feels both cost-saving and rewarding. The coolant replacement process for the Zotye Damai X5 is quite simple, but requires careful attention. First, park the car on level ground and wait until the engine is completely cooled before starting, otherwise, you might get scalded. Prepare the tools: a wrench, a funnel, a large container to catch the old fluid, and new coolant. Open the radiator cap, carefully drain the old fluid, and avoid dumping it into the environment as it’s harmful. After draining the old fluid, it’s best to flush the radiator with clean water once or twice to ensure no residue remains. Then, add the new coolant—use the type recommended by the manufacturer, such as ethylene glycol-based, and mix it properly, usually at a 50% coolant and 50% distilled water ratio. After filling the radiator, don’t rush to close the cap. Start the engine and let it run for about ten minutes, monitoring the temperature and bleeding out air bubbles. If the water level drops, top it up. Regularly changing the coolant prevents engine overheating and corrosion, extending the car’s lifespan. My car has never had cooling issues thanks to this routine—just make sure to have the right tools and wear gloves for protection. If beginners are unsure, they can search for video tutorials online and follow along, saving both money and time.
As a car owner, I prioritize safety when handling coolant replacement. For the Zotye Damai X5, don't rush the coolant change. First, park the car on level ground and let it cool completely for at least half an hour, avoiding contact with hot components. Wear gloves for protection and use a bucket to safely collect the old fluid for proper disposal, preventing environmental contamination. Then, open the radiator cap to drain the old coolant. Flush the system with clean water several times to ensure thorough cleaning. Next, add new coolant to the specified level, making sure to choose the correct color-matched product to avoid mixing and causing chemical reactions. Start the engine and let it run for a while until air bubbles are expelled and the water level stabilizes before stopping. Check for any leaks. Regularly replacing coolant offers numerous benefits, protecting the engine from corrosion and preventing freeze damage in winter. The entire process should be completed within half an hour. While it's a simple DIY task, if you're not experienced, it's advisable to seek professional service to avoid mistakes that could damage the car and lead to unnecessary expenses.
