How to Replace the Coolant in a Haima S5?
1 Answers
Haima S5 requires coolant replacement every two years or 40,000 kilometers. The method for replacing the coolant in a Haima S5 is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a special focus on the five-way hose. The five-way hose gets its name from having five connection points that link various parts. The coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, the hose should be replaced or the connection re-secured based on the situation. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling the reservoir until clean water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir may have a faint pink color. Continue adding clean water until clear water flows out. Note: Remember to remove the heater hose and drain all water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. This method allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.
