How to Replace the Coolant in a Baojun 510?
4 Answers
Baojun 510 coolant replacement method is: 1. Cool the car, unscrew the radiator drain valve, and drain the coolant; 2. Clean the cooling system, then fill with new coolant to the level between the MAX and MIN marks, tighten the radiator cap, and complete the coolant replacement. The Baojun 510 is a compact SUV under SAIC-GM-Wuling, featuring a distinctive split headlight design. The LED daytime running lights are connected to the large front grille, with the main headlights positioned on either side of the grille. The rear features conventional halogen taillights.
Changing the coolant yourself is simple and cost-effective. I usually do it every two to three years. Before starting, make sure the engine is completely cool to avoid burns. Park on level ground, turn off the engine, and open the hood to locate the radiator. Use a wrench to loosen the drain plug at the bottom (usually under the chassis) and let the old coolant flow into a large bucket to avoid mess. After draining, tighten the plug and prepare new coolant of the brand recommended by the manufacturer. Slowly fill the radiator to the MAX line. Start the engine and let it warm up for a few minutes, then turn on the heater to check for any fluctuations in the coolant level. Remember to wear gloves throughout the process, as the old coolant is toxic and should be taken to a repair shop for disposal. DIY is fun—you learn small car maintenance tips while saving a couple hundred bucks in labor costs.
Changing the coolant requires caution. Always wait for the engine to cool down to avoid burns from high temperatures. Gather the necessary tools: a new bottle of coolant, a wrench, and a drain pan. When performing the operation, first loosen the bottom drain plug to release the old fluid, being careful not to let it splash onto your skin or the car body. Don’t skip the step of flushing the radiator—use clean water to rinse out residual dirt to ensure the effectiveness of the new coolant. Before adding the new coolant, make sure the system is clean. After filling it to the proper level, start the car to check for air bubbles or leaks. I recommend changing the coolant every two years, as degraded coolant can corrode the engine and impair cooling performance. Safety first—take your time throughout the process, and you’ll successfully maintain your beloved car.
Easy steps to teach you how to change: Wait until the car engine cools down completely before starting. Locate the small drain plug under the radiator and use a wrench to loosen it. The old coolant will drain out—collect it in a bucket. Rinse the system before adding new coolant for a cleaner change. Pour the new coolant up to the specified fill line. After starting the car, observe if the water level stabilizes and ensure the plug is tight with no leaks. It's not difficult to learn and do, helping maintain your car's health.
