How to Replace the Cigarette Lighter Socket of Nissan Sylphy?

[LaCharlie]

The replacement method for the cigarette lighter socket of Nissan Sylphy is as follows: 1. Unscrew the outer shell by rotating it counterclockwise; 2. Use a wrench to remove the screws of the cigarette lighter socket, then it can be taken off; 3. Remove the panel of the gear shift lever by prying one side up with your hand or a flat-head screwdriver, then the entire panel can be disassembled; 4. Pull out the plastic box of the cigarette lighter panel directly with your hand, disconnect the connecting wires first, and then pull out the entire box. Taking the 2021 Classic 1.6XE Manual Comfort Edition Sylphy as an example, the car's body dimensions are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm.

[VonSophia]

Last month, I just helped a friend replace the cigarette lighter socket in his Nissan Sylphy. Simply put, it's a step-by-step disassembly process. First, you need to disconnect the negative terminal of the battery to cut off the power—safety first, don't risk electric shock. Then locate the cover on the center console, unscrew the small screws with a Phillips screwdriver, and gently pry open the panel without applying too much force to avoid damaging the plastic. The cigarette lighter socket is connected to wires, so carefully unplug the connector without pulling the wires apart. Align and insert the new socket, then reinstall it in its original position and tighten the screws. When testing, reconnect the battery power and plug in a USB adapter to check if the light turns on. The whole process takes less than twenty minutes, requiring only a screwdriver and gloves. Before starting, watch online videos for clear demonstrations of many details—doing it yourself can save over two hundred yuan.

[McJude]

I was quite nervous when replacing the cigarette lighter socket for the first time, but the design of the Nissan Sylphy is relatively simple. First, disconnect the negative terminal of the battery to avoid short circuits and fire hazards. Then locate the panel screws near the center console—usually, removing two screws allows you to lift the cover. The old socket has a clip and a wiring connector; carefully remove it and replace it with the new one, securing it in place as before. After installation, power it on to test and confirm it can charge. It's advisable to have a small wrench handy for assistance. If the panel gets stuck, avoid forcing it open, as it can easily get damaged. For beginners unsure about the process, having a friend assist can help prevent wiring mistakes. After the replacement, it feels much more convenient, eliminating the need for frequent trips to the repair shop.

[EmersonRose]

Replacing the cigarette lighter socket is all about safety and stability. I usually disconnect the battery first and wear insulated gloves for protection. The center console structure of the Nissan Sylphy isn't complicated—just remove the screws to expose the panel, then unplug the old connector and install the new socket. The whole process takes about ten minutes. Just buy a replacement part that matches your car model. After installation, remember to test if it works properly to avoid looseness. Regular checks can prevent similar issues.