How to Replace the Cabin Air Filter on a Besturn B50?

1 Answers
Ronnie
07/30/25 2:47am
The method to replace the cabin air filter on a Besturn B50 is: Open the glove box, grasp both ends with both hands, and pull upwards firmly to remove the glove box. Then, take off the cover plate to reveal the cabin air filter. Simply pull out the old filter and replace it with a new one. The function of the cabin air filter is to ensure the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. It also separates solid impurities such as dust, pollen, and abrasive particles from the air. Taking the 2019 1.6L Besturn B50 Manual Elite as an example, it is a compact car under FAW Besturn, equipped with a 1.6L engine and a 5-speed manual transmission. In terms of the suspension system, the front suspension is an independent double-wishbone setup with a stabilizer bar, while the rear suspension is a multi-link independent suspension.
Was this review help?
8
3
Share
More Forum Discussions

What is the method for removing the steering wheel of the new Jetta?

To remove the steering wheel of the new Jetta, you need to first remove the airbag. There are two holes under the steering wheel. Use a small flat-head screwdriver to push the clip inside, and then you can take out the airbag. After removing the airbag, loosen the steering wheel fixing screw to remove the steering wheel. Taking the Jetta VS5 as an example, the following is an introduction to the Jetta VS5: 1. Vehicle positioning: The Jetta VS5 is a compact SUV. 2. Power: The entire series is equipped with a 1.4-liter turbocharged engine from the Volkswagen EA211 series, with a maximum power of 150 horsepower and a maximum torque of 250 Nm. It can output the maximum power at 5000 to 6000 rpm and the maximum torque at 1750 to 3000 rpm. It is matched with a 5-speed manual transmission or a 6-speed automatic manual transmission. 3. Suspension: The front suspension of the Jetta VS5 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. The independent suspension improves the wheel adhesion performance.
15
0
Share

How to Adjust the Heavy Steering Wheel of Mercedes-Benz C-Class to Make It Lighter?

Start the car, keep the steering wheel stationary for 3 seconds, then turn it to the full lock position and hold for another 3 seconds before returning it to the center and turning off the engine. Try driving to see if the steering wheel becomes lighter. Below are the reasons for a heavy steering wheel: 1. Insufficient power steering fluid: Power steering fluid is a medium oil used in the car's power steering pump, which helps transmit steering force and provides cushioning. The power steering fluid needs to be replaced regularly, and any leaks should be checked. When the power steering fluid is insufficient, the steering will feel heavy and stiff. 2. Low tire pressure: Low tire pressure increases the contact area between the tires and the road surface, leading to greater friction and making steering more difficult, resulting in a heavy steering wheel, which is not conducive to driving safety. 3. Toe-in: Toe-in can also affect the car's steering. Toe-in helps the steering wheels automatically return to the center, ensuring stable straight-line driving. If there is an issue with this, it can cause the steering to feel heavy. 4. Steering gear or power steering pump failure: The steering gear and power steering pump also affect the car's steering. Any failure in these two critical components can make steering difficult. Issues such as universal joints, chassis suspension stabilizer bars, or plain bearings should not be overlooked.
10
1
Share

How to Turn Off the Radio in a Mazda?

Mazda3 radio can be turned off using the following methods: 1. The most direct way is to turn off the audio system on the center control panel; 2. Switch to other audio modes, with the switch usually located on the center control panel; 3. Some models allow operation via the remote combination switch on the steering wheel or icons on the touchscreen interface. Additional Information: 1. How to use the radio: When using navigation, the system prioritizes incoming calls or navigation announcements, automatically lowering the media volume. Generally, the rotary button for adjusting the radio volume can be pressed briefly to turn it on or off. Rotating the knob clockwise or counterclockwise adjusts the volume up or down. Pressing the knob once mutes the sound, and pressing it again restores the sound. 2. How to turn on the radio: After starting the vehicle, swipe the center screen to the right to find the radio operation interface. To turn on the radio, click the play button, and the radio will start working. To search for channels, click the search station button at the top of the screen to initiate the automatic channel search function. To stop channel searching, press the "Stop" button at the finger's position to halt the station search.
19
1
Share

What is the penalty for running a red light in the left-turn waiting area?

Running a red light in the left-turn waiting area will result in 6 demerit points and a fine of 200 yuan. Red light violation penalty standards: According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations", driving a motor vehicle in violation of traffic signal lights will result in 6 demerit points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in 3 demerit points. How to check for red light violations: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in with your ID card, find and click on the violation handling option. In the violation handling section, you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check by using the touch query terminals at the office halls of traffic police branches in various districts and counties. Log in to the external service website of the local public security bureau's traffic management bureau: find the vehicle violation query, enter the license plate number and vehicle engine number, and click query.
18
4
Share

What to Do If You're Late for the Driving Test (Subject 3)?

Communicate with the examiner or try to apply for the last batch of the test or a make-up test. If the application is not approved, it will be treated as a failure, and you can reschedule the test after 10 days. Below are some related extended information: 1. Number of attempts for Subject 3 test: There are only 5 test attempts in total. If you fail the test, you will have one free make-up test opportunity on the spot. If you still fail the make-up test, the test will be terminated. If you fail the fifth attempt, all previously passed subjects will be invalidated, and you will need to reapply for the driver's license, which means starting from Subject 1 again. 2. Canceling the test appointment: If you are certain that you cannot attend the test on the day due to personal reasons, cancel the appointment at least one day in advance to avoid it being treated as a failure and wasting a test opportunity. You can cancel the appointment through the Traffic Management 12123 app or the Comprehensive Traffic Safety Service Platform, or go to the vehicle management office if necessary. However, please note that multiple cancellations may affect the success rate of future test appointments, so students should consider carefully.
11
3
Share

How many days can a temporary license plate be replaced with a formal one?

Temporary license plates can be replaced within 15 days. Below is some related additional information: 1. Temporary license plates: A temporary vehicle license plate is a provisional driving permit issued by the vehicle management department of the public security bureau when a car has not yet been officially registered due to pending procedures. According to the "Road Traffic Safety Law of the People's Republic of China," it is explicitly stated that vehicles must display license plates as required when driven on roads, and failure to do so will result in penalties. However, before obtaining formal license plates, it is mandatory to apply for temporary vehicle license plates in accordance with regulations to legally drive on roads. 2. Proper display of temporary license plates: Vehicle owners should promptly apply for formal license plates from the vehicle management authority. Two temporary license plates should be displayed simultaneously: one should be affixed to the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, and the other should be affixed to the lower left corner of the rear windshield inside the vehicle. For other types of vehicles where installation conditions are limited, only one temporary license plate is required, but it must be affixed to the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, to ensure driving safety.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.