How to Replace the Cabin Air Filter of Mitsubishi ASX?
3 Answers
Mitsubishi ASX's cabin air filter replacement method: Open the glove compartment in front of the front passenger seat of the Mitsubishi ASX, and you will see a black connecting rod used to hold the glove compartment. Gently pry the black connecting rod out of the buckle position, then pull the sides of the glove compartment outward with force. After removing the glove compartment, you will see a white plastic cover inside. Gently pry the buckle on the right side of the white cover outward, pull out the cabin air filter, and replace it with a new one. The Mitsubishi ASX is a compact SUV produced by Mitsubishi Motors, with dimensions of 4295mm in length, 1770mm in width, and 1625mm in height. The design of the Mitsubishi ASX continues the current family-style design language of Mitsubishi, featuring a shark-like front face that looks quite aggressive, with metal chrome trim on the grille enhancing this bold appearance.
I used to drive a Mitsubishi ASX, and changing the cabin air filter isn’t actually difficult, but it requires attention to detail. First, locate the glove compartment on the passenger side, gently open it, and remove the contents inside. Then, press down and pull out the entire glove box slightly—don’t force it too hard to avoid breaking the clips. At this point, you’ll see the filter cover, which is a small plastic panel. Use a screwdriver to remove a few screws or pry open the clips. Take out the old filter and note the direction of the arrow; otherwise, installing the new filter backward will reduce its effectiveness. I usually buy cheaper compatible filters online and replace them every six months—it’s cost-effective and healthier. After finishing, reassemble everything as it was and test the AC. If there’s no strange odor, you’ve succeeded. Remember, don’t force it without the right tools, as debris getting into the vents could cause bigger issues.
As a novice with limited car experience, I always worry about making mistakes when replacing the cabin air filter. First, I sit in the passenger seat and open the glove compartment, clearing out any clutter to avoid obstructions. There are soft clips on both sides of the glove compartment—just a gentle push and it pops out of place. The filter cover above has several fastening points, and I carefully pry it open with my fingers or small pliers to avoid scratching the plastic. When pulling out the old filter, I make sure to note the arrow markings and not overlook them. The new filter is inserted in the correct orientation and pressed firmly into place. The whole process takes about ten minutes but should be done slowly, as glove compartment parts are fragile and prone to damage. After replacement, I test the air conditioning—fresh airflow means the job is done. Doing this regularly keeps the cabin air clean and helps prevent illness.
