How to Replace the Cabin Air Filter of Haval H2?
2 Answers
Haval H2 cabin air filter replacement steps are: 1. The cabin air filter is located inside the glove compartment on the passenger side. Open the glove compartment, pinch the small pull rod at the bottom right corner, and remove the pull rod; 2. Apply force to the top left corner by pressing it to the right, and the left side will pop out. The same applies to the right side; 3. After removing the glove compartment, you will see the clips on both sides of the cabin air filter. Gently pull the filter out from both sides simultaneously; 4. Align the new filter box correctly and gently push it into place. The dimensions of the Haval H2 are 4330mm in length, 1815mm in width, and 1700mm in height. The vehicle is powered by a 1.5T turbocharged engine, paired with a 7DCT Getrag wet dual-clutch transmission, delivering a maximum power of 110kW and a peak torque of 210Nm.
I've changed the air conditioning filter for the Haval H2 a few times now, and I'm pretty handy at it. The filter is hidden behind the glove compartment on the passenger side. First, you need to fully open the glove compartment, then gently press and pull down the clips on both sides to release them. Once it's out, you'll see a plastic cover, usually held by clips—just pry it off gently. When removing the old filter, pay attention to the arrow direction. For the new filter, make sure it's the right model for your car and align the arrow when inserting it back, with the arrow pointing toward the interior of the car. A small screwdriver or just your fingers are enough for the job. After reassembling the cover and snapping the glove compartment back in, test the AC to make sure it's running smoothly. Personal tip: Replace it every six months or 10,000 kilometers to maintain fresh air quality, especially during pollen season to prevent allergies. When buying a filter, search for your car model on Taobao—it's just 20 yuan, no need to overspend at the dealership.
