···
Log in / Register

How to replace the cabin air filter of Baojun 510?

3 Answers
MacMorgan
07/24/25 4:35am
Baojun 510 cabin air filter replacement method: The cabin air filter of this vehicle is located below or inside the glove box on the passenger side. To replace it, first unscrew the two plastic screws on the outside, then remove the sponge protective cover. Push the tray below the filter firmly to remove it, take out the old filter, install the new one, and then reassemble by following the previous steps in reverse order. The Baojun 510 is a compact SUV under SAIC-GM-Wuling, with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, and a wheelbase of 2550mm. In terms of drivetrain, the Baojun 510 features front-engine, front-wheel drive.
Was this review help?
20
2
Share
DiIsla
08/10/25 10:40pm
I enjoy tinkering with cars in my spare time, and I've changed the cabin air filter for my Baojun 510 several times. It feels quite easy but requires attention to detail. First, buy a new filter online, which costs around 20-30 yuan. Preparations include parking on level ground, turning off the engine, and wearing gloves to avoid dust allergies. Open the glove compartment on the passenger side, press firmly inward, and you'll see a clip or stopper inside—gently pull it out. Then, slide open the rectangular filter box cover, remove the old filter, and replace it with the new one, making sure the arrow points downward to indicate the airflow direction. The whole process takes less than 10 minutes. After finishing, turn on the AC to check if the air smells fresher—it’s a great way to save dozens of yuan on mechanic fees. I recommend replacing it every 10,000 km—doing it yourself is totally worth it.
Was this review help?
3
2
Share
Expand All
AngeloRose
09/24/25 5:38am
It's quite simple for me to do this, after all, changing the cabin air filter can significantly improve the air quality inside the car. The filter for the Baojun 510 is located behind the glove box. First, open the glove box and press it towards the seat direction with your hand, and the stopper will come loose. Wear gloves when removing the old filter to prevent dust, and align the arrow on the new filter to the downward direction. I bought a filter for just over ten yuan on Taobao; simply search for the model number to find it. After installation, test the airflow to ensure it's normal. Doing it yourself takes just a few minutes, saving money and time while giving a sense of achievement. Remember not to pull the clips too hard to avoid damaging the plastic parts, and clean up the area after finishing.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What car brands are there in Switzerland?

The car brands in Switzerland include: HispanoSuiza, Rinspeed, and LeBlanc. Below is the relevant information: 1. HispanoSuiza: HispanoSuiza was once a luxury car brand. 2. LeBlanc: LeBlanc is a brand that manufactures sports cars, similar to Koenigsegg. 3. Background: Rinspeed was founded in Switzerland in 1977 and has modified vehicles such as the turbocharged Volkswagen Golf GTi and the gull-wing-door Golf. In 1990, the company relocated to Zumikon and began collaborating with Mercedes-Benz and AMG.
3
0
Share

What are the engine displacements of the Mustang?

The Mustang comes with engine displacements of 3T and 5.0L. Below are the specific details about the Mustang: 1. Body dimensions: The car measures 4794mm in length, 1916mm in width, and 1373mm in height, with a wheelbase of 2720mm, a minimum ground clearance of 150mm, and a curb weight of 1702kg. 2. Powertrain: The Mustang features a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 2.3T turbocharged engine, delivering a maximum horsepower of 299PS, a peak torque of 434Nm, and a maximum power output of 220kW, paired with a 10-speed automatic transmission.
6
5
Share

What is the method to reset the maintenance light on the third-generation Haval H6?

Power on the car while keeping the engine turned off; press the reset button once, and the display will show the reset system. Each press of the reset button will switch to the next reset system; select the maintenance reset system, then press and hold the reset button for about 3 seconds.
15
5
Share

How Long Must a New Car Be Licensed?

In principle, a new car must be registered within 30 days after purchase, but it must be licensed within the validity period of the invoice. A motor vehicle can only receive three temporary licenses, each valid for one month, so the licensing must be completed within three months; otherwise, the invoice will become void. Here are the key points to note regarding the licensing timeline for new cars: 1. After purchasing a new car, there is no strict national regulation specifying the exact timeframe for registration (licensing). However, it is subject to limitations based on national environmental policies and changes in vehicle announcements. 2. Domestic motor vehicles must comply with the announcements approved by the Ministry of Industry and Information Technology to be manufactured and sold. Before purchasing, buyers must verify whether the manufacturer has the necessary national announcement qualifications. If a car is not licensed for an extended period, the announcement may be canceled or altered. Once the announcement is canceled, the vehicle cannot be licensed. 3. If a new car is not licensed promptly and national environmental policies change, the engine may no longer meet local environmental regulations, potentially making it impossible to license the vehicle.
13
3
Share

What is the deployment speed of airbags?

Airbag deployment requires a relative vehicle speed greater than 50km/h and a reverse-direction acceleration of over 40g during the collision moment. This means the relative speed must be >50km/h, and the impact force must be sufficient to generate this speed. Below is additional information: 1. Airbag deployment conditions: Different automakers set varying conditions for airbag deployment. The impact point must be near the sensors, typically within a 60° angle from the vehicle's front. Side airbag/curtain sensors are located near the doors. Airbags deploy only in collisions with rigid walls or obstacles. Hitting the sensor area with hard objects like hammers won't trigger deployment because sensors primarily respond to speed-induced forces. 2. Sensors: The controller sends deployment commands based on three acceleration sensors (not speed sensors). Therefore, even at high speeds, if the acceleration value (corresponding to impact force) doesn't exceed the threshold, the airbag won't deploy. Conversely, even at lower speeds, if the acceleration exceeds the set value, the controller will command airbag deployment.
20
4
Share

What is the tire model of the Volkswagen Tayron?

The tire model of the Volkswagen Tayron is 235/55R18. The first number 235 indicates the tire width is 235MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 18 denotes the rim diameter is 18 inches. The Volkswagen Tayron has a top speed of 200km/h, accelerates from 0-100km/h in 8.7 seconds, and has a fuel consumption of 6.8L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard rim 5.00F".
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.