How to Replace the Cabin Air Filter in the Second-generation Eado?
2 Answers
The replacement method for the cabin air filter in the second-generation Eado is as follows: 1. Open the glove compartment cover and remove the fasteners securing the glove box; 2. Squeeze both sides of the glove box inward with both hands to remove it, revealing the cabin air filter cover; 3. Press firmly on the fixing clips on both sides of the cover to remove it; 4. Pull the old cabin air filter outward, then reverse the removal steps to install the new one. Taking the 2018 Eado Manual Fashion model as an example, its body dimensions are: length 4710 mm, width 1820 mm, height 1505 mm, with a wheelbase of 2700 mm, a fuel tank capacity of 53 liters, and a trunk capacity of 500 liters.
I've been driving a second-generation Eado for several years, and changing the air conditioning filter is a breeze—doing it myself saves a lot of money. First, empty the glove compartment of any clutter. There are usually plastic clips on both sides of the compartment; gently press them to release and remove the glove box. Inside, you'll find the filter housing—just pull open the cover and take out the old filter. If it's black and dirty, it's time for a replacement. When buying a new filter, pay attention to the arrow indicator, which represents the airflow direction and should face downward during installation. Installing it incorrectly can reduce airflow and affect performance. After installation, snap the glove box back into place until you hear a click. The whole process takes just over ten minutes and requires no tools. I change it every six months or 10,000 kilometers, and the air inside the car feels much fresher, preventing mold growth and protecting respiratory health. If done at a 4S shop, it costs over a hundred yuan, but buying the filter myself only costs a few dozen—it's a real bargain. Remember to turn off the engine and air conditioning before starting for safety.
