How to Replace the Cabin Air Filter in a Malibu?

1 Answers
DeLincoln
07/30/25 2:52am
Malibu replacement method for cabin air filter: 1. Remove the strap located on the right side inside the glove compartment; 2. Release the clips on both sides of the glove box; 3. Disconnect the light connector; 4. Remove the old cabin air filter and install the new one. The Malibu is a mid-size 4-door 5-seater sedan with body dimensions of 4855mm in length, 1854mm in width, 1476mm in height, and a wheelbase of 2737mm. It is equipped with a 1.5T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 125 kW and a maximum torque of 250.3 N·m. The drivetrain is front-wheel drive, with front MacPherson strut suspension and rear multi-link independent suspension.
Was this review help?
6
3
Share
More Forum Discussions

Can the 4th Year Vehicle Inspection Be Processed Online?

It can be processed online for annual inspection. Concept of Vehicle Inspection: Vehicle inspection refers to a mandatory test that every vehicle with an official license plate and registration certificate must undergo. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Safe Operation of Motor Vehicles." Vehicle inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Inspection Schedule: According to China's Road Traffic Safety Law, motor vehicles must undergo safety technical inspections at specified intervals from the date of registration. For passenger vehicles used for commercial purposes, inspections are required annually within the first 5 years and every six months thereafter. For cargo vehicles or large trucks, inspections are required annually within the first 10 years and every six months thereafter. For small vehicles, inspections are required every two years within the first 6 years, annually thereafter, and every six months after 15 years.
4
1
Share

Do You Have to Wait 10 Days After Failing Subject 4?

Subject 4 retake must wait for ten days, and can only be scheduled after the ten-day period. Introduction to Subject 4: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 test was divided into two parts: besides the road test, a safety and civilized driving knowledge test was added, commonly referred to as "Subject 4," which assesses "driving ethics." Retake Regulations: According to Article 44 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Each subject test can be taken once, and if the test is failed, a retake is allowed once. If the retake is not taken or is still failed, the current test session is terminated, and the applicant must schedule the test again. However, Subject 2 and Subject 3 tests must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid.
2
3
Share

What brand is sonavox audio?

sonavox is the car audio brand of Suzhou Sonavox. Introduction to sonavox: Sonavox Company possesses R&D and design capabilities for acoustic products, system solutions, and related algorithms. Its products mainly include in-car speaker systems, car amplifiers, and AVAS, providing customers with comprehensive product solutions. The company was among the first to achieve domestic production of car speakers and has developed strong competitiveness in the international market through continuous independent innovation. Introduction to Sonavox audio: Suzhou Sonavox primarily focuses on researching, designing, and manufacturing audio components ranging from basic to high-end, as well as comprehensive car audio systems. The predecessor of Suzhou Sonavox was a township enterprise founded in 1975 called "Wuxian No.1 Radio Components Factory." In 1992, leveraging the opportunities of export-oriented economic development, it established "Suzhou Sonavox Electronics Co., Ltd." through a joint venture. In December 2017, it was wholly transformed into "Suzhou Sonavox Electronics Co., Ltd." Suzhou Sonavox has always been committed to audio solutions. As experts in consumer and car audio, it has grown into a global supplier and a sought-after OEM partner in the automotive industry.
5
5
Share

What is the speed range for 2nd gear?

The corresponding speed range for 2nd gear in a car is 5-20 km/h. Vehicle speed: Vehicle speed refers to the distance a car travels per unit of time, commonly referred to as speed, with units typically expressed in kilometers per hour or meters per second. Vehicle speed is one of the three key parameters used to describe traffic flow and holds significant importance in traffic flow theory research. Speed ranges for each gear: 1st gear is typically used for starting, with a speed range of 0-5 km/h; 2nd gear corresponds to 5-20 km/h; 3rd gear corresponds to 20-40 km/h; 4th gear corresponds to 40-60 km/h; and 5th gear corresponds to 60-100 km/h. Generally, the optimal time to shift gears is when the engine reaches 2000 rpm, preferably not exceeding 2500 rpm.
9
3
Share

What is the best way to handle full responsibility for hitting a pedestrian while driving?

After hitting a pedestrian while driving, you should protect the scene and immediately call the police, dialing 120 for emergency medical assistance. Relevant legal provisions: According to Article 13 of the "Regulations on the Handling Procedures for Road Traffic Accidents": In the event of a fatal accident, an injury accident, or a property damage accident with any of the following circumstances, the parties involved shall protect the scene and immediately call the police: the driver does not have a valid motor vehicle driver's license or the vehicle driven does not match the type of vehicle permitted by the license; the driver is suspected of drinking alcohol or taking controlled psychotropic or narcotic drugs; the driver is suspected of engaging in school bus operations or passenger transport, seriously exceeding the rated passenger capacity, or seriously exceeding the prescribed speed limit; the motor vehicle has no license plate or uses a forged or altered license plate; the parties involved cannot move the vehicle on their own; one party leaves the scene; there is evidence that the accident was caused intentionally by one party. Compensation process after hitting a pedestrian: Remind the injured party to keep medical expense invoices and medical records, and retain all relevant receipts for any advance payments; wait for the injured party to complete treatment, then schedule a time to negotiate and mediate with the insurance company and traffic police team, and issue a mediation agreement on the spot once an agreement is reached.
12
5
Share

What are the test items for C1 License Subject 3?

The C1 driver's license Subject 3 test includes: vehicle preparation, starting, driving straight, gear shifting operations, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the scope of vehicles that can be driven with a C1 license includes: small and micro passenger vehicles with a total mass not exceeding 4.5 tons; light and micro cargo vehicles, with the total length of the cargo vehicle not exceeding 6 meters; light, small, and micro special-purpose vehicles; small passenger vehicles with a seating capacity of 9 or fewer people, meaning vehicles with 9 seats or more cannot be driven. A C1 license also allows driving vehicles covered by C2, C3, and C4 licenses. Precautions for the C1 Subject 3 test are as follows: Pre-test preparation: Walk around the vehicle once before getting in, and pause near the monitoring area. Light simulation: Check if the light switches are reset before the simulation test begins. Starting: Always observe the surrounding traffic environment before starting. During driving: Keep your eyes on the road ahead and avoid following too closely. Details of the penalty points for the C1 driver's license Subject 3 test are as follows: Failing to observe the rear and right-side traffic conditions through the interior and exterior rearview mirrors before stopping results in disqualification. Failing to stop within the specified distance after the examiner issues the pull-over instruction results in disqualification. After stopping, if the vehicle body exceeds the right edge of the road or the sidewalk edge, it results in disqualification. After stopping, failing to turn your head to observe the side rear and left traffic conditions before opening the door results in disqualification. Failing to use or incorrectly using the turn signal before stopping deducts 10 points. Turning the steering wheel less than 3 seconds after activating the turn signal before stopping deducts 10 points. After stopping, if the vehicle body is more than 30 cm away from the right edge of the road or the sidewalk edge, it deducts 10 points. Failing to fully engage the parking brake lever after stopping deducts 10 points. Releasing the foot brake pedal before fully engaging the parking brake lever deducts 10 points. Failing to turn off the engine before getting out of the vehicle deducts 5 points.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.