···
Log in / Register

How to Replace the Cabin Air Filter in a Camry?

4 Answers
DelJosie
07/29/25 1:25pm
The steps to replace the cabin air filter in a Camry are: 1. Open the upper right side of the engine compartment and remove the air filter cover; 2. Take out the old air filter and replace it with a new one. The functions of the cabin air filter are: 1. To separate dust, pollen, and abrasive particles from the air; 2. To ensure clean air in the cabin and prevent bacterial growth. The Camry's body dimensions are: length 4885mm, width 1840mm, height 1455mm, with a wheelbase of 2825mm and a fuel tank capacity of 60 liters. The Camry is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 131kW and a maximum torque of 210Nm.
Was this review help?
16
4
Share
LeAlaina
08/14/25 3:52am
I think replacing the cabin air filter is an easy DIY job. First, open the passenger door and empty the glove box. There are clips on both sides—just press them gently to release. Then, you'll see a plastic cover behind it, usually secured with a small screw. Use a Phillips screwdriver to remove it, and the filter will be exposed. Pull out the old filter and check the arrow marked on it. Insert the new filter in the same direction to avoid affecting airflow. After reinstalling the cover and glove box, test the AC to ensure it feels clean. It's best to replace it every six months, especially during spring and fall when odors are more likely. Buying a filter yourself costs just over ten bucks, much cheaper than spending over a hundred at a repair shop. The whole process takes about 15 minutes and ensures fresh, healthy air in your car.
Was this review help?
2
1
Share
Expand All
McLillian
10/10/25 2:54am
For those with little experience, I recommend letting a professional mechanic handle it for safety. The Camry's cabin air filter is located behind the glove compartment on the passenger side, requiring removal of clips and covers. DIY attempts may easily break plastic components, potentially leading to higher repair costs. At a 4S shop, professionals can replace it in minutes for just tens of RMB including labor, offering good value. Replace the filter promptly when musty odors emerge from AC vents - don't delay as it affects respiratory health. The most hassle-free approach is changing it during routine maintenance. While genuine matching filters cost about 20-30 RMB online, letting experts handle it avoids minor risks like short circuits.
Was this review help?
13
4
Share
Expand All
KaiLee
11/23/25 4:05am
The money-saving replacement method is simple: First, open the passenger door, pull out the glove box, unscrew a small cover inside, and remove the old filter while noting the arrow direction. Insert the new filter in the same direction, tighten the screw, and restore the glove box. The whole process takes less than five minutes without tools. The original model filter is cheap online, just a few dozen bucks. Don’t wait until the AC blows dust—replace it every six months for better air quality and savings. Easy DIY job.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What to Do When Your Car Is Blocked and Can't Get Out?

Here are the solutions when your car is blocked and can't get out: 1. Check the insurance company of the blocking car: If your car is stuck due to another vehicle parked improperly, you can check the insurance company of that car. Usually, the insurance policy is pasted on the upper right corner of the front windshield. 2. If the other car is illegally parked on the roadside, call the police directly: Dial the traffic police number and report the location of the illegally parked car, which is obstructing normal traffic. After receiving the report, the traffic police will usually first identify the owner's information and contact them. If they can't be reached, a tow truck will be responsible for removing the vehicle. 3. Contact the parking lot administrator: If you are blocked in your residential community or a shopping mall parking lot, find a security guard or parking manager who can quickly contact the car owner.
3
1
Share

What does in-person verification at the DMV mean?

In-person verification at the DMV refers to the process where the individual must be physically present at the main hall of the municipal DMV or any of its branch offices, carrying their second-generation ID card, to have their information recorded on-site. This replaces the previous paper-based review process, saving time and eliminating the need to submit the ID card. Scenarios requiring in-person verification: Generally, after a driving school student completes their medical examination, the school will register the student's information online, known as online verification. Only in cases where a student's identity or phone number information is abnormal is in-person verification required. Both online and in-person verification are processes for the Ministry of Public Security to confirm identity online. In-person verification process: After the medical examination, go to the location designated by the driving school to fill out the registration application form. Submit the ID card, residence permit, and application form to the staff for in-person verification (the individual must be present as a photo will be taken on-site). After verification, submit the medical examination form, registration form, and application form to the on-site staff (if the ID card is demagnetized or is a temporary ID, it must also be submitted along with the forms). Functions of in-person verification: After verification, you can apply for self-scheduling of initial driver's license tests, cross-regional testing systems, and driver's license renewal upon expiration. It also allows for replacement of vehicle registration certificates, changes to vehicle or driver contact information, traffic violation inquiries, pre-selection of vehicle license plate numbers, vehicle inspection appointments, and other driver and vehicle management services.
10
0
Share

Can You Still Use a Car Cover in Rainy Weather?

You can use a car cover in rainy weather, but since the cover is not waterproof, it needs to be removed after the rain stops to allow the car to dry. The functions of a car cover: Primarily, a car cover is used to prevent rainwater from entering the vehicle, avoiding short circuits and damage to wiring or power sources; To protect the car paint from scratches, tree sap, insect residues, or acid rain damage during long-term parking; To shield the car from intense sunlight, which can harm the paint and rubber components; To prevent rainwater from corroding the metal parts inside the car during rainy days and to keep dust away during windy weather. When not to use a car cover: Do not cover if the car body has standing water: Over time, watermarks may form, which are difficult to remove. Typically, watermarks can only be addressed through car detailing, polishing, or grinding. Additionally, prolonged moisture on the paint can accelerate oxidation. If the car body has standing water and is covered, the trapped moisture will struggle to evaporate, leading to rusting of internal components over time. Do not cover if the car body is dirty: If the car is dirty, it must be washed before using a car cover to properly protect the paint; otherwise, the effort may backfire. Since the car cover is not a perfectly fitted protective film, it can shift relative to the car body, especially during strong winds. Covering a dirty car will cause dust and small stones on the surface to continuously rub against the paint, resulting in damage.
19
3
Share

How many kilometers can a fully fueled Fit travel?

Fit can travel five hundred kilometers on a full tank of fuel. More details about the Fit are as follows: 1. The Fit (FIT) adopts the overall design concept of "Exciting-H-Design", featuring Honda's latest family-style front face design concept "solidwing", where the front grille and headlights are integrated, highlighting sharpness and coolness. The side of the body uses a unique cool blade-style double waistline design. The tension-filled rear design is paired with LED light source rear combination lamps, presenting a more advanced texture. 2. It also offers seven rich body colors for consumers to choose from, namely Ocean Blue, Starlight Silver, New Moon Yellow, Ruili Red, Taffeta White, Satin Silver, and Offt Black.
5
0
Share

What are the hidden features of the 6th generation Camry 240g?

6th generation Camry 240g hidden features: key-linked opening of driver's window and sunroof; automatic folding and unfolding of rearview mirrors; lane change signal flash count, default is 3, options are 3, 4, 5, 6, 7; when the external rearview mirror adjustment switch is set to R and shifted to R gear, the external rearview mirror will automatically tilt down. Below is additional information: The sixth-generation Camry Classic edition boasts a noble appearance, comfortable interior space, perfect driving experience, meticulous safety protection, ubiquitous high-tech configurations, and a steadfast pursuit of environmental protection. From any perspective of examination and comparison, the Camry stands at the level of a world-class mid-to-high-end sedan.
16
2
Share

Will Overheated Tires Cause a Blowout?

Car tires will not blow out due to overheating. Effects of Overinflated Tires: Overinflated tires reduce the contact area with the ground, significantly increasing the pressure and wear per unit area. This can easily lead to loss of braking control, blowouts when encountering road protrusions or depressions, damage to the vehicle's suspension system, and an uncomfortable ride. Effects of Underinflated Tires: Underinflated tires increase the contact area with the ground, causing abnormal temperature rises inside the tire while driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of internal steel wires and fabric layers, creating hidden risks for blowouts. It also increases fuel consumption and reduces tire lifespan. Regularly Check Tire Pressure: Tire pressure is a critical factor affecting tire lifespan. Both overinflation and underinflation can reduce tire longevity to some extent. It is recommended to check tire pressure at least once a month. Regular Tire Rotation: Since the working conditions and loads on each tire vary—generally, the rear tires bear more load than the front tires, and the right tires more than the left—it is important to rotate the tires promptly as part of regular vehicle maintenance. Regularly Clean Tires: Driving on various complex road conditions can cause tire treads to pick up debris such as small stones and glass. These foreign objects can produce noise while driving and act as 'tire killers.' If not removed promptly, they can gradually puncture the tire, creating safety hazards and compromising driving safety.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.