How to Replace the Cabin Air Filter in a Besturn B50

What are the new regulations on used car policies?

The new regulation on used car policies is the comprehensive removal of the used car relocation restrictions. After the full cancellation of the used car relocation restrictions, it will standardize the used car transaction order and further unleash the potential of the used car market. Details of the cancellation of used car relocation restrictions: For used cars that meet the national emission and safety standards for in-use motor vehicles and are within the validity period of regular environmental inspections and annual inspections, relocation procedures can be processed. From the date of issuance of this implementation plan, the used car relocation restriction policies already implemented in 12 cities in eastern, western, and northern Guangdong will be abolished. Definition of used car relocation restrictions: Used car relocation restrictions refer to the restrictive policies imposed by some local governments that prohibit the registration of non-compliant out-of-town used cars. In essence, these are policy measures taken by local governments to protect their local car sales markets and prevent price shocks caused by a large influx of out-of-town used cars.

8

0

Share

How Long After Passing Subject 1 with 24 Points Deducted Can You Take Subject 3?

A driver's license has been deducted 24 points, and the Subject 1 test has been passed. The latest date for the Subject 3 test must be taken within ten days after passing Subject 1. Legal basis: If a motor vehicle driver has two or more instances of reaching 12 points or a cumulative score of 24 points or more in a scoring cycle, the vehicle management office must also conduct a road driving skills test within ten days after the driver passes the road traffic safety laws, regulations, and related knowledge test. Subject 3 test process: There are a total of 16 procedures, which are: preparation before getting on the car, starting, driving in a straight line, shifting gears, turning left at an intersection, turning right at an intersection, changing lanes, passing through an intersection, parking by the roadside, passing through a pedestrian crossing, passing through a school zone, passing through a bus station, meeting another vehicle, overtaking, making a U-turn, and driving at night. There are two difficulties in the Subject 3 test: The first is the mismatch between speed and gear. Mistakes regarding high gear at low speed and low gear at high speed need to be avoided during the test. Before shifting gears, make sure to adjust the speed to match the gear, then shift gears! During driving, check the speedometer every eight seconds to prevent such errors. The second difficulty is the deviation in straight-line driving. Although you cannot turn the steering wheel significantly during straight-line driving, if the vehicle was not adjusted properly before the test or if you notice the driving trajectory still deviates from the straight line after starting, you can slightly turn the steering wheel, generally within about 5 degrees. This way, after driving a long distance, the vehicle's trajectory will gradually tend to straighten, and then you can straighten the steering wheel.

9

2

Share

Does idling with the air conditioning on harm the car and consume more fuel?

Using the air conditioning while the car is idling consumes fuel. Keeping the air conditioning on while idling not only significantly increases fuel consumption but may also damage the vehicle. The power output consumed by the air conditioning accounts for only a small portion of the engine's idling energy. However, when the air conditioning is on during idling, the engine not only drives the air conditioning compressor but also needs to maintain the normal operation of the power steering and brake booster pumps. The latter two functions are completely unnecessary when the car is parked, and keeping them running is a waste of power. Common misconceptions about car air conditioning usage: 1. Randomly adjusting the air vents: Randomly adjusting the direction of the air vents can also affect the temperature inside the car. If the air vents are adjusted haphazardly, the cold air from the air conditioning will cool down high-temperature components that do not need cooling, thereby offsetting the cooling effect. This not only outweighs the benefits but also fails to achieve the desired cooling effect. 2. Keeping the recirculation mode on for long periods: Many car owners keep the recirculation mode on to save energy, which does reduce the number of times the compressor starts and lowers fuel consumption. However, over time, the air inside the car can become stale, and the oxygen levels may drop, leading to dizziness or even hypoxia among passengers. 3. Avoid using the air conditioning while parked: Using the air conditioning while parked is very dangerous because when the car is idling or moving at low speeds, gasoline does not burn completely, producing carbon monoxide. If the air conditioning is in the fresh air mode, it will draw this carbon monoxide into the car, potentially causing carbon monoxide poisoning. This is especially risky during traffic jams when the air intake of the air conditioning may be directly facing the exhaust of the vehicle in front. Therefore, it is best to switch to recirculation mode during traffic jams.

13

4

Share

How to Remove the Rear Bumper of a Sylphy?

Sylphy rear bumper removal method: Remove the fixing screws near the fender and taillight, then pry along the edge of the bumper to separate and remove it. Below is the installation method: During installation, align the plastic clips with the buckles and slowly push them back into place, you can tap them tight by hand, then reinstall the screws in their original positions. Here are some relevant details: 1. The 2021 Sylphy has dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm, and the body type is a 4-door 5-seater sedan. 2. In terms of power, this car is equipped with a 1.6L L4 naturally aspirated engine, delivering a maximum horsepower of 135ps and a maximum torque of 159nm.

6

4

Share

Is a Tire Pressure of 180kPa Indicative of a Flat Tire?

If you notice that your vehicle's tire pressure has dropped to 180kPa, it is highly likely that the tire has been punctured. In such a situation, it is best not to continue driving. You should inflate the tire as soon as possible or replace it with a spare tire, and promptly visit the nearest tire repair shop for servicing. Hazards of Overinflated or Underinflated Tires: For tires, the pressure should neither be too high nor too low. Overinflation reduces the contact area between the tire and the ground, leading to poor traction, which can affect the vehicle's handling and driving stability. Underinflation, especially during high-speed driving, can cause wave-like deformation of the tire, shortening its lifespan and increasing the risk of a blowout. Standard Tire Pressure Guidelines: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar.

10

3

Share

What to Do If the Car Seat Feels Uncomfortable with the Front Higher Than the Back?

Seat height adjustment is usually located on the left side, allowing you to adjust the seat height up and down. The front and rear adjustment is typically found under the seat on the right side with a lever to adjust the distance forward and backward. For regular seats, careful adjustment can usually solve the issue. If it's a fixed racing-style seat (bucket seat), using a lumbar cushion is recommended. Classification of Car Seats: Car seats can be divided into separate seats and bench seats based on shape. By function, they can be categorized into fixed seats, removable seats, and adjustable seats. Car seats should meet the following conditions: The arrangement of seats within the entire cabin should be reasonable, especially ensuring the driver's seat is in the optimal position. The design of the seat must align with human physiological functions, prioritizing comfort while striving for aesthetic appeal. Seats must be safe and reliable, with sufficient strength, stiffness, and durability, featuring a compact structure while minimizing weight. Any adjustment mechanisms designed for passenger comfort should have reliable locking devices to ensure safety.

2

Share

How to Replace the Cabin Air Filter in a Besturn B50

What are the new regulations on used car policies?

How Long After Passing Subject 1 with 24 Points Deducted Can You Take Subject 3?

Does idling with the air conditioning on harm the car and consume more fuel?

How to Remove the Rear Bumper of a Sylphy?

Is a Tire Pressure of 180kPa Indicative of a Flat Tire?

What to Do If the Car Seat Feels Uncomfortable with the Front Higher Than the Back?

Why is the fuel warning light yellow?

What to Do When an LNG Vehicle is Parked for a Long Time?

Which Determines Acceleration, Torque or Power?

What items are included in the physical examination for driver's license renewal?