How to Replace the Cabin Air Filter in a 2016 Teana?
2 Answers
Steps to replace the cabin air filter in a 2016 Teana: 1. The cabin air filter is located inside the glove compartment on the passenger side. Open the glove compartment; 2. Remove the cabin air filter cover; 3. Pull out the old cabin air filter and install the new filter according to the arrow direction; 4. Reinstall the cover and glove compartment. The 2016 Teana is a mid-size 4-door 5-seater sedan with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, and a wheelbase of 2825mm. This model features a MacPherson strut front suspension and a trapezoidal control arm multi-link rear suspension. In terms of power, it is equipped with a 2.0L naturally aspirated engine, paired with a CVT transmission.
As a 2016 Teana owner, I can confirm that replacing the AC filter yourself is actually quite simple. I was a bit nervous during my first attempt but got the hang of it quickly. Let me explain the process: The filter is located behind the glove compartment on the passenger side. First, empty the glove box to avoid making a mess, then locate the limit buckles or screws on both sides of the glove box and loosen them with a screwdriver. Gently pull out the entire glove box—avoid using excessive force to prevent breakage. Once removed, you'll see a small cover panel inside; pry it open to access the filter compartment. When removing the old filter, pay attention to the airflow direction arrow to avoid installing it backwards. Insert the new carbon fiber filter (available online for 20-30 RMB) in the correct orientation, ensuring a proper fit. The whole process takes about 10 minutes. Replacing it annually or every 20,000 km prevents musty odors and allergies, saving you hundreds of yuan compared to dealership service. After installation, test the AC—if the airflow feels stronger, you've done it right! This simple DIY significantly improves cabin air freshness.
