How to Replace the Cabin Air Filter in a 10th Generation Civic?

1 Answers
LeVictoria
07/29/25 9:15pm
The steps to replace the cabin air filter in a 10th generation Civic are: 1. Press the side latches to lower the glove box; 2. Remove the cover plate and take out the old cabin air filter; 3. Install the new filter. The 10th generation Civic is a compact 4-door 5-seater sedan. Taking the 2021 Civic as an example, its dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm. The 2021 Civic is equipped with a 1.5T turbocharged engine producing 177 horsepower (130kW maximum power). It features MacPherson strut front suspension and multi-link rear suspension.
Was this review help?
10
3
Share
More Forum Discussions

Are Semi-Slick Tires Slippery in the Rain?

Semi-slick tires are not slippery in the rain. Semi-slick tires are actually more performance-oriented compared to regular tires. When the tire reaches a certain operating temperature, the tread softens, creating high adhesion that enhances grip and ensures driving stability. The advantages of semi-slick tires include improved steering responsiveness and increased contact area with the road. Additionally, these tires incorporate Kevlar fibers—the primary material used in bulletproof vests—which enhance sidewall rigidity, extend tire lifespan, and improve overall support.
13
0
Share

What materials are used in Tesla battery packs?

Tesla battery packs are ternary lithium batteries, with lithium nickel cobalt aluminum oxide as the cathode material. Tesla is an American electric vehicle and energy company founded by Martin Eberhard and Marc Tarpenning in Silicon Valley, USA. It primarily manufactures and sells electric vehicles, solar panels, and energy storage equipment. Tesla's vehicle lineup includes the Model 3, Model Y, Model S, Model 3 (imported), and Model X. Taking the Model 3 as an example: this car has a length, width, and height of 4694mm, 1850mm, and 1443mm respectively, with a wheelbase of 2875mm. It is equipped with a fixed gear ratio transmission and features a 4-door, 5-seat sedan body type.
8
2
Share

Has the Tiggo 3 been discontinued?

Currently, the Tiggo 3 has not been discontinued. The Tiggo 3 is a compact 5-door, 5-seat SUV with dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. It is equipped with a 5-speed manual transmission and powered by a 1.5L naturally aspirated engine, delivering a maximum power of 85 kW and a maximum torque of 143 Nm. The Tiggo 3 features front-wheel drive, with a MacPherson independent front suspension and a double-wishbone independent rear suspension. The front tires are sized at 215/60R17, while the rear tires are 195/65R15.
4
3
Share

What Are the Reasons for the High Fuel Consumption of Domestic Cars?

There are several reasons for the high fuel consumption of domestic cars: 1. Engine technology issues: Although China has developed many technologies to reduce engine fuel consumption, such as variable valve timing (VVT), turbocharging, and direct fuel injection, the overall mastery of these technologies still falls short compared to joint-venture cars. Domestic car manufacturers cannot directly use these technologies and must find ways to circumvent patent restrictions, which limits engine development. 2. Transmission matching: No matter how powerful an engine is, it requires a well-matched transmission to maintain the most economical RPM range. Therefore, transmission matching is a crucial and time-consuming task. Due to a lack of experience and time constraints in the domestic car development process, it is often difficult to achieve comprehensive optimization, resulting in engines frequently operating outside the optimal RPM range, wasting energy and fuel. 3. Vehicle weight: Many people believe that heavier vehicles are safer, but this is not necessarily true. Some lightweight high-strength steels or aluminum alloys can achieve higher strength than conventional steel. Higher vehicle weight directly leads to higher fuel consumption, indicating the use of ordinary materials and suboptimal design. For instance, more steel is often used to ensure strength, and engines may not be made entirely of aluminum. In contrast, joint-venture cars often employ high-strength materials and hollow-out designs to reduce weight while maintaining strength, achieving lightweighting to minimize the impact of vehicle weight on fuel consumption.
2
2
Share

How Long Does It Take to Fully Charge a Car After Battery Drain?

After a car battery drains, it typically takes about one hour of driving to fully recharge it. Additional Information: 1. Generally, driving on the highway for more than an hour can fully charge the car battery, maintaining it in optimal condition. 2. During regular use, avoid leaving the car unused for extended periods. If the car is not used for a long time, such as 20 days or a month, the battery cable should be disconnected, or the car should be started and driven for several dozen kilometers every two weeks to ensure the battery remains functional. 3. Do not crank the engine for more than 3 seconds each time you start it. If the first attempt fails, avoid repeatedly trying to start the engine immediately. From the perspective of automotive working principles, continuous cranking will cause excessive battery discharge and damage. The interval between restart attempts should be more than 5 seconds.
11
4
Share

What is the working principle of the lock-up clutch?

The working principle of the lock-up clutch is: The engagement and disengagement of the lock-up clutch are controlled by the electronic control unit through the lock-up solenoid valve. When the vehicle is driving on poor road surfaces, the lock-up clutch can be disengaged to allow the torque converter to function, fully leveraging the advantages of hydraulic transmission in automatically adapting to drastic changes in driving resistance. When the vehicle is driving on good roads, the lock-up clutch should be engaged to make the input and output shafts of the torque converter rigidly connected, thereby switching to direct mechanical transmission. The lock-up clutch consists of components such as the lock-up piston, damping plate, and turbine drive plate. The lock-up piston and damping plate are connected by splines and can move back and forth, while the damping plate and turbine drive plate are connected via damping springs to attenuate torsional vibrations during the engagement of the lock-up clutch.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.