How to Replace the Cabin Air Filter in a 10th Generation Civic?
4 Answers
The cabin air filter in the 10th generation Civic is located inside the glove compartment on the passenger side. Below is relevant information about replacing the cabin air filter: Method for replacing the cabin air filter: When replacing the cabin air filter, you need to open the glove compartment. There is a damper on the right side that needs to be removed first. After removing the damper, there are two limiters on the inner side of the glove compartment. You need to squeeze them inward with your hands to remove the glove compartment. Cabin air filter replacement interval: The cabin air filter should be replaced every 20,000 kilometers or once a year. If the vehicle is used in more severe environments, it can be replaced earlier.
As a seasoned driver who's owned a 10th-gen Civic for four years, I'm quite familiar with replacing the cabin air filter. First, empty the glove compartment on the passenger side, then press both sides inward with your hands to release and remove the entire unit. You'll then see a black plastic cover - just pinch the clips and gently pry it open. Remember the arrow direction on the old filter (indicating airflow direction), and install the new filter with its arrow pointing downward. DIY replacement saves about 200 yuan in labor costs. I recommend monthly filter checks, especially after rainy seasons when mold growth is common. Last time I found half a leaf stuck in there - no wonder the AC smelled funky. The whole process takes about 10 minutes; using an LED headlamp improves visibility.
Last month, I just replaced the cabin air filter for my bestie’s Honda Civic. The key is glove box removal: first pull it out fully, then squeeze both sidewalls simultaneously to release it completely. Next, handle the white filter housing—don’t be too forceful when flipping open the three clips. Remember to choose an activated carbon PM2.5 filter when buying; the OEM one is too thin. Install the new filter like inserting a SIM card, aligning it with the ‘UP’ marking on the housing cover. Finally, reinstall the glove box until you hear a click to ensure proper seating. DIY replacement is the most hassle-free—dealers often recommend changing it every 6 months, but frequency should actually depend on your driving environment.
Changing the air conditioning filter on the 10th-gen Civic is actually super easy. Just prepare a Phillips screwdriver and a compatible filter. First, remove the two screws on the glove box, then detach the bottom damper rod. The filter compartment is located in front of the blower motor—when replacing the old filter with a new one, make sure the airflow arrow points downward. Wear gloves to prevent dust during the process, and turn the AC to maximum for two minutes before installation for a cleaner result. It's recommended to replace the filter every 10,000 km, or earlier in areas with frequent rain. I always keep two spare filters in the trunk; buying them online is 60% cheaper than OEM parts, and they perform even better.
