How to Replace the Brake Light on a Chery Tiggo 3?
1 Answers
The method for replacing the brake light on a Chery Tiggo 3 is as follows: Use a cross-head screwdriver or socket to remove the bolts, pull the lamp assembly out from the rear pillar, turn the socket counterclockwise and remove it, then take out the old bulb and insert the new one. Below are the correct ways to use vehicle lights: 1. Poorly lit roads: On roads with no street lighting or poor illumination, you can use high beams. However, when meeting other vehicles or pedestrians, switch to low beams to avoid dazzling them. 2. When needing to read road signs or other markers: If you are unfamiliar with the road and need to read signs or markers, you can use high beams but should quickly switch back to low beams. 3. When overtaking another vehicle: You should turn on the left turn signal in advance and alternate between high and low beams or honk the horn to alert the vehicle ahead to yield. 4. When passing through corners, curves, or intersections without traffic signals: You can alternate between high and low beams as a warning. 5. When driving through tunnels: Turn on high beams, but when meeting another vehicle, switch to low beams in advance. 6. In urban areas with street lighting at night: You must use low beams. 7. In areas without street lighting when it's dark: When driving in areas without street lighting at night or during dusk or dawn, you must turn on low beams. 8. When visibility is obstructed: In conditions of heavy fog, snow, or rain where visibility is obstructed, you must turn on low beams even during the day.
