How to Replace the Brake Fluid for Haval H6?
2 Answers
Great Wall Haval H6 requires brake fluid replacement, and the official recommendation from Great Wall is to replace it every 40,000 kilometers. You can go to a 4S shop or choose a repair shop for the brake fluid replacement. The brake fluid reservoir of the H6 is located on the left side of the engine compartment near the windshield, which is a somewhat transparent white reservoir. Introduction to Haval H6: 1. Body dimensions: The length, width, and height are 4649mm, 1852mm, and 1710mm respectively, with a wheelbase of 2680mm. 2. Powertrain: It uses two engines, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine.
Replacing the brake fluid for the Haval H6, DOT 4 type is suitable. Prepare tools such as wrenches, hoses, and containers. Park the car securely, locate the brake fluid reservoir under the hood, and use a pump or syringe to extract the old fluid to avoid spills. Proceed with the wheels in order, starting with the right rear wheel. Open the bleeder screw, attach a hose to collect the old fluid, and have an assistant press the brake pedal slowly to release the old fluid and air bubbles. Repeat the process for the left rear wheel, right front wheel, and left front wheel. When adding new fluid, ensure it does not exceed the maximum level. Repeatedly press the pedal to expel any remaining air and check if the brake response is firm. For the Haval H6, it is recommended to replace the brake fluid every two years or 40,000 kilometers to maintain system efficiency. Doing it yourself can save money, but be sure to wear gloves as the fluid is corrosive to the skin. Finally, test the vehicle's brakes at low speed to ensure safe driving.
