How to Replace the Battery of Zotye T600 Key?
2 Answers
Steps to Replace the Battery of Zotye T600: 1. Press the mechanical key lock button and pull out about two-thirds of the mechanical key body. 2. Twist the mechanical key body up and down to pry open the upper and lower covers. 3. Remove the old battery and replace it with a new one. Precautions for Replacing the Smart Key of Zotye T600: A. Do not touch the circuit board or battery terminals. B. If the remote gets wet, dry it immediately. C. When replacing the battery, ensure that the electrode contact areas are free from dirt, grease, and other foreign objects. D. After replacing the battery, check to ensure all functions of the smart key are working properly.
I've been driving a Zotye T600, and replacing the key battery is quite easy. Look for the thin seam on the key shell, usually along the edge of the back cover. Use a coin or a flat-head screwdriver to gently pry open the cover, being careful not to apply too much force to avoid scratches. Once opened, you'll see the button battery, most likely a CR2032 model. Before removing the old battery, note the positive and negative directions clearly—usually the convex side faces up or has a '+' sign. Replace it with a new battery of the same model, ensuring the direction is correct; otherwise, the buttons won't work. When reassembling, just align and press it back into place. Changing the battery yourself is cost-effective and convenient—buying one from a supermarket or online costs just a few dollars. If the key doesn't respond after replacement, it might be due to poor contact or a faulty battery; try reseating it properly. Key batteries typically need replacement every two years or so. To extend their lifespan, avoid exposing them to water and minimize friction by keeping them in a pocket.
