How to Replace the Battery of Wuling Hongguang Remote Key?

[BraxtonLee]

Steps to replace the battery of Wuling Hongguang remote key are as follows: 1. Use a suitable cross screwdriver to unscrew the screws on the surface of the remote (for Wuling Hongguang S models, the back cover of the remote needs to be pried open first), then gently separate the front body and the back cover. 2. Carefully remove the battery from the remote. Do not use hard metal objects to forcefully pry out the battery. 3. Replace with two new batteries of the same model. 4. Reassemble the remote, ensuring the front body and back cover are tightly combined to prevent water ingress. 5. Check the functionality of the remote. Relevant introduction about Wuling Hongguang is as follows: 1. In terms of appearance, Wuling Hongguang combines the design languages of business vehicles and mainstream SUVs, using a square shape and smooth lines to outline the grand and fashionable visual style of this iconic vehicle. 2. In terms of interior configuration, Wuling Hongguang enhances the texture and comfort of the seats by applying laser-carved leather patterns, increasing the travel of the middle row seats, and improving the wrapping feel of the seats.

[Madeline]

Last time I replaced the battery for my Wuling Hongguang remote key by myself, here's how I did it: First, prepare a CR2032 button battery, which can be easily found in supermarkets. Use a small flat-head screwdriver or a thin card to carefully insert it into the groove on the back of the key and gently pry open the shell. Remember to be gentle, as the plastic clips can break easily. Once opened, you'll see the button battery compartment. Use small tweezers to remove the old battery, paying attention not to reverse the positive and negative poles. Insert the new battery in the same orientation until you hear a click, indicating it's in place. Finally, align the shell's slots and press firmly to close it. The whole process takes about five minutes. Remember to wash your hands before starting to avoid grease affecting the circuit contact. If you're inexperienced and afraid of damaging it, spending 20 yuan at an auto parts store to have someone else replace it might be more worry-free.

[McAiden]

I replaced the battery in my Wuling Hongguang key myself. Preparing the right tools is crucial—I used an old bank card to gently pry open the key shell along the seam between the upper and lower halves. Be careful not to force the plastic shell; a gentle approach ensures it opens without damage. The battery compartment inside is usually circular. Use your fingernail to remove the old battery, and make sure not to buy the wrong type—CR2032 is the correct model. Before installing the new battery, clean the contact points with an alcohol swab to prevent dust from interfering with the signal. After replacement, test the remote lock and unlock buttons for responsiveness. When closing the shell, align the snap-fit positions carefully. For longer-lasting batteries, opt for Panasonic or Xiaomi brands from the supermarket—they can power the key for up to two years. After reassembly, press the key shell firmly to ensure no looseness, preventing damage from road vibrations.

[VanAnna]

Don't go to the 4S store to replace the Wuling Hongguang key battery as they charge high fees. Step 1: Find the gap. There's a small slot near the key ring that can be pried open even with a coin. Step 2: Remove the old battery, remembering the polarity rule with the shiny side facing up. Step 3: Buy a new battery. The CR2032 model costs just a few bucks and is super cheap. Step 4: Insert the new battery, just press the metal spring tightly. Finally, press the shell firmly and test the remote sensitivity by pressing it a few more times. My experience from changing it three times is that you must move slowly as the battery compartment plastic is very fragile. Avoid directly touching the circuit board with metal to prevent short circuits. Don't throw away the old battery randomly; dispose of it properly for environmental protection.

[Eli]

Replacing the Wuling key battery is simple: prepare a coin cell battery and a plastic pry tool. There's a small groove on the back of the key; insert the tool and gently pry open the casing, being careful not to use excessive force near the clips. Use a toothpick to carefully remove the old battery, and make sure to check the CR2032 model to avoid buying the wrong one. When installing the new battery, ensure the positive side (shiny side) faces up and press the metal contacts flat. Before closing the casing, check the seal position and align it with the slots before pressing firmly. Test the key by standing one meter away from the car and pressing the button—if the car lights flash, it means success. The whole process takes less than three minutes, and the tools are common household items. Key points: avoid getting water in the battery compartment, do not install the battery backward, and avoid using sharp tools that could damage the circuit.