How to Replace the Battery of Baojun 630 Key?
2 Answers
Baojun 630 key battery replacement method is: 1. Pull the small switch on the key to take out the mechanical key; 2. Remove the mechanical key, use a screwdriver or other thin tool to pry open, turn around the gap to separate the smart key; 3. Take out the old battery inside and replace it with a new one. The Baojun 630 is the first mid-size sedan under the Baojun brand, with a body length of 4597 mm, width of 1736 mm, height of 1462 mm, equipped with a 1.5-liter displacement engine, matched with a 5-speed manual transmission. In terms of appearance, the Baojun 630 has smooth and natural body lines, a conventional tail design, and an overall stable shape. The interior is simple and elegant, with fine workmanship and good space practicality.
A few days ago, I replaced the battery in my Baojun 630 key fob, and the process was quite straightforward. First, locate the side of the key fob where there's a small clip or gap. Gently pry open the back cover using a fingernail or a small screwdriver, being careful not to apply too much force to avoid scratching the plastic. Once opened, you'll see the old battery, typically a CR2032 model. Make sure to note the positive and negative terminals to avoid installing the new battery backward. Remove the old battery and replace it with a new CR2032, ensuring the orientation matches before snapping the cover back on. After completing the task, press the key fob buttons to confirm everything works properly. It's important to monitor battery life, as replacements are usually needed every 1 to 2 years. If you notice delayed responses, replace the battery promptly. After changing batteries a few times, I learned to keep spare CR2032 batteries on hand to avoid being stranded with a non-functional key fob when locking the car.
