How to Replace the Battery of a Geely Boyue Car Key?

[DiMariana]

Geely Boyue car key battery replacement method is as follows: 1. Press the silver round button at the top of the car key; 2. Pull out the car key and insert back a small part of the mechanical key; 3. Turn the mechanical key clockwise to separate it from the cover; 4. Once a gap appears, use your hands to pry open the car key cover, splitting it into two halves; 5. Use a small knife or screwdriver to pry open the circuit board along one side; 6. After prying open the circuit board, remove the old battery and install the new one; 7. Reassemble the circuit board and put the car key cover back in place. The Geely Boyue is a compact SUV produced by Geely Auto, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, a wheelbase of 2760mm, and a fuel tank capacity of 58 liters.

[VanEmerson]

I recently replaced the battery in my Geely Boyue car key, which was a pretty straightforward task. You see, there's a small gap on the back of the key. I used a coin to gently pry open the casing, being careful not to apply too much force to avoid scratches. Inside, there's a button battery, usually a CR2032 model. When removing it, remember the orientation of the positive and negative terminals. Replace it with a new battery of the same model, align it properly, and then snap the casing back into place with a click. Finally, test the unlock button to confirm it's working correctly. The whole process takes just a few minutes, and all you need is a coin or a small screwdriver. I recommend checking the battery life every two years to avoid awkward situations like being unable to lock the car. Doing it yourself saves money and is convenient, but if you're not familiar with it, you can always ask the 4S store for help.

[RyleeRose]

I've replaced the remote key battery for the Geely Boyue several times. First, locate the plastic clip point on the side of the key, then carefully pry open the cover using a plastic pry tool or thin card. The battery compartment will be exposed - when removing the old battery, pay attention to its size and model to ensure the new CR2032 is of the same specification. During installation, align the positive and negative terminals correctly with the slots. After installation, gently press the housing to secure it. Test the remote functions to ensure they work properly before finishing. Avoid using metal tools to prevent damage to internal components. Additionally, regular maintenance of the key can extend its lifespan. When the battery is depleted, the key light will dim or the buttons may fail. I check the key's condition every six months as a preventive measure.

[LeHarley]

I've been driving for years, and changing the battery in my Geely Boyue key is quite easy. There's a small notch on the back of the key; just pry open the cover and replace the battery. Make sure you don't get the battery model wrong, and test the button response after putting it back. If you're not sure how to do it, searching for a video online to follow along can be more reassuring. Doing it yourself saves time and avoids remote control failure while driving. The general steps are opening the key, replacing the battery, closing it, and checking the functions.